¥ 2150.00
¥ 155.00
¥ 1250.00
¥ 1650.00
¥ 价格面议
易卖工控网(www.ymgk.com)提供”低价供应SNAP-AIRTD通讯模块..”,产品详情:品牌/厂家:其他品牌、型号:通讯模块、成色:全新、货期:期货 7天内发货、保修:365天,更多产品详情就上易卖工控网。
The SNAP-AIRTD provides two channels of analog temperature input. Nominal input temperature range is -200 to +850 degrees C. Input range is 0 to 400 ohms. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. Modules are factory calibrated.
Part of the SNAP PAC System, the module mounts on aSNAP PAC rackwith a SNAP PACbrainorrack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for anAllen-Bradley RSLogix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
The SNAP-AIRTD uses 100 ohm platinum inputs. For other similar modules, see theSNAP-AIRTD-1K(1000 ohm platinum) and theSNAP-AIRTD-10(10 ohm copper).
Build your system in theSNAP I/O Configurator.
OPTO22固态继电器,世界一流品牌。千年寿命、终生质保让你选购更放心。
OPTO22专业供应
| SNAP-AIRTD-1K | SNAP-AIRTD | SNAP-AIRTD-10 |
3-wire RTD input | 1000 ohm platinum @ 0 °Calpha= 1000 ohm nickel @ 0 °C 1000 ohm nickel @ 70 °C | 100 ohm platinum;alpha= 100 ohm nickel, -60 to 250 °C 120 ohm nickel, -80 to 260 °C | 10 ohm copper;alpha= |
Input Temperature Range | -200 °C to 850 °C | -200 °C to 850 °C | -180 °C to 260 °C |
Input Range | 0 to 4000 ohms | 0 to 400 ohms | 0 to 25 ohms |
Over-Range Limit | to 4400 ohms | to 440 ohms | to ohms |
Resolution (average) | °C ( ohms) | °C ( ohms) | °C ( ohms) |
Input Filtering | -3 dB @ Hz | -3 dB @ Hz | -3 dB @ 100 Hz |
Data Freshness (Max) | 100 ms | 100 ms | 168 ms |
Lead Compensation | Automatic when used with SNAP brains | Automatic when used with SNAP brains | Automatic when used with SNAP PAC brains |
DC Common Mode Rejection | >-120 dB | >-120 dB | >-120 dB |
AC Common Mode Rejection | >-120 dB at 60 Hz | >-120 dB at 60 Hz | >-120 dB at 60 Hz |
Excitation (typical) | mA constant current | mA constant current | mA constant current |
Maximum Lead Resistance | >40 ohms single wire (all leads to be equal resistance) | >40 ohms single wire (all leads to be equal resistance) | >15 ohms single wire (all leads to be equal resistance) |
Maximum Fault Voltage at Input | ±15 V | ±15 V | ±15 V |
Maximum Operating Common Mode Voltage | 250 V | 250 V | 250 V |
Accuracy | °C | °C | °C |
Isolation | 1500 V | 1500 V | 1500 V |
Power Requirements | 5 VDC (±) @ 190 mA | 5 VDC (±) @ 190 mA | 5 VDC (±) @ 190 mA |
Operating Temperature | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C |
Storage Temperature | -25 °C to 85 °C | -25 °C to 85 °C | -25 °C to 85 °C |
Torque, hold-down screws | 4 in-lb ( N-m) | 4 in-lb ( N-m) | 4 in-lb ( N-m) |
Torque, connector screws | in-lb ( N-m) | in-lb ( N-m) | in-lb ( N-m) |
Agency Approvals | CE, RoHS, DFARS | UL, FM, CE, RoHS, DFARS | CE, RoHS, DFARS |
Warranty | Lifetime | Lifetime | Lifetime |
1065 | SNAP Analog Input Modules Data Sheet Details SNAP I/O analog input modules are part of Opto 22\'s SNAP PAC System. This document includes descriptions, specifications, and wiring and dimensional diagrams for most analog input modules. For analog modules with channel-to-channel isolation, seeform #1182. |
1569 | SNAP PAC System Product Guide Details This document lists and describes all Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, SNAP PAC brains, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed. |
1767 | I/O Solutions for Temperature Monitoring Details This white paper describes various temperature sensors such as RTDs, thermocouples, ICTDs, thermistors, and infrared sensors, and the Opto 22 solutions for using them. |
1767C | I/O Solutions for Temperature Monitoring (Chinese) Details This document is written in Chinese. This white paper describes various temperature sensors such as RTDs, thermocouples, ICTDs, thermistors, and infrared sensors, and the Opto 22 solutions for using them. |
Scaling and Linearization Example Details A example strategy written in PAC Control Basic that demonstrates how to scale and linearize values. This example strategy uses subroutines to perform most calculations. |
CAD Drawing: SNAP I/O Module Details This CAD file includes drawings that apply to most SNAP analog and digital I/O modules. |
SNAP-TEX-CBS6 | 8-wire Cable for SNAP I/O Modules, Straight-through Wiring |
SNAP-TEX-32 | 32-Point Breakout Board for SNAP I/O Modules |
SNAP-FIELDCONB | SNAP Module Field Connector 10-pack |