¥ 24800.00
¥ 20.00万
¥ 10.00万
¥ 58000.00
¥ 2480.00
易卖工控网(www.ymgk.com)提供”DHC709-RM双晶探头 如庆科技”,产品详情:品牌/厂家:奥林巴斯、型号:DHC709-RM、成色:全新、货期:期货 28天内发货、保修:365天,更多产品详情就上易卖工控网。
双晶探头
Two angled elements create a V-shaped sound path in the test material. This "Pseudo-Focus" enhances resolution in the focal zone. A dual element transducer consists of two crystal elements housed in the same case, separated by an acoustic barrier. One element transmits lon gitudinal waves, and the other element acts as a receiver.
双单元换能器
Two angled elements create a V-shaped sound path in the test material. This "Pseudo-Focus" enhances resolution in the focal zone. A dual element transducer consists of two crystal elements housed in the same case, separated by an acoustic barrier. One element transmits lon gitudinal waves, and the other element acts as a receiver.
两个角度的元素在测试材料形成一个V形的声音路径。这种“伪焦点”提高在焦区的决议。双元件传感器由两个晶体元件安置在相同的情况下,由声屏障分离。一个元素传递纵向波,和其他的元素作为一个接收器。
优势:
•Improves near surface resolution
•提高近表面分辨率
•Eliminates delay line multiples for high temperature applications
•消除高温应用的延迟线的倍数
•Couples well on rough or curved surfaces
•夫妇在粗糙的表面或曲面
•Reduces direct back-scattering noise in coarse grained or scattering materials
•减少直接背散射噪声粗粒或散射材料
•Combines penetration capabilities of a lower frequency single element transducer with the near surface resolution capabilities of a higher frequency single element transducer
•结合频率较低的单元素传感器的高频率的单元素传感器近表面分辨率的穿透能力
•Can be contoured to conform to curved parts
•可以外形符合弯曲的部分
Applications:
应用:
•Remaining wall thickness measurement
•剩余壁厚的测量
•Corrosion/erosion monitoring
•腐蚀/侵蚀监测
•Weld overlay and cladding bond/disbond inspection
•堆焊、熔覆债券/脱粘检测
•Detection of porosity, inclusions, cracks, and laminations in castings and forgings
•检测的孔隙率,夹杂物,裂纹,并在铸件和锻件的叠片
•Crack detection in bolts or other cylindrical objects
在螺栓或其他圆柱形物体•裂纹检测
•Maximum temperature capability is 800°F (425°C) for 5.0 MHz and below; 350°F (175°C) for 7.5 MHz and 10 MHz. Recommended duty cycle for surface temperatures from 200°F (90°C) to 800°F (425°C) is ten seconds maximum contact followed by a minimum of one minute air cooling (does not apply to Miniature Tip Dual)
•***温度的能力是800°F(425°C)为5兆赫以下;350°F(175°C)为7.5兆赫和10兆赫。推荐的占空比,表面温度从200°F(90°C)800°F(425°C)是十秒***接触的至少一分钟的空气冷却(不适用于小型尖双
齐头外壳双晶
Flush Case Dual Transducers
· Metal wear ring extends transducer life
· Wear indicator references when transducer face needs resurfacing
· Knurled, 303 stainless steel case
· Replaceable cable design (special dual cables with strain relief available)
冲洗箱双转导
•Metal wear ring extends transducer life
•metal磨损环扩展了传感器的生活
•Wear indicator references when transducer face needs resurfacing
当面对需要参考•wear指示器传感器表面重修
•Knurled, 303 stainless steel case
•knurled 303不锈钢框
•Replaceable cable design (special dual cables with strain relief available)
•replaceable电缆设计(特殊的双电缆以及应变救济available)
型号 | 频率 | 毫米 | 英寸 | 连接器类型 |
DHC703-RM
双传感器,1兆赫,0.50。元素的大小,冲洗案例式,对微粒的连接器包括检验证书 | 1 | 13 | 0.5 | Right Microdot |
DHC785-RM
双传感器,2.25兆赫,0.25。元件的直径,冲洗案例式,对微粒的连接器包括检验证书 | 2.25 | 6 | 0.25 | Right Microdot |
CHC706-RM
centrascan复合双元件传感器,2.25兆赫,0.50。元件的直径,冲洗的情况下的风格,直角连接器 | 2.25 | 13 | 0.5 | Right Microdot |
DHC706-RM
双传感器,2.25兆赫,0.50。元件的直径,冲洗案例式,对微粒的连接器包括检验证书 | 2.25 | 13 | 0.5 | Right Microdot |
DHC711-RM
双传感器,5兆赫,0.25。元件的直径,冲洗案例式,对微粒的连接器包括检验证书 | 5 | 6 | 0.25 | Right Microdot |
DHC709-RM
双传感器,5兆赫,0.50。元件的直径,冲洗案例式,对微粒的连接器包括检验证书 | 5 | 13 | 0.5 | Right Microdot |
DHC713-RM
双传感器,10兆赫,0.25。元件的直径,冲洗案例式,对微粒的连接器包括检验证书 | 10 | 6 | 0.25 | Right Microdot |