易卖工控网（www.ymgk.com）提供”佳邦HP-100风批/电批扭力测试仪/螺丝刀电批扭力计”，产品详情：品牌/厂家：佳邦、型号：HP-100、成色：全新、货期：期货 7天内发货、保修：365天，更多产品详情就上易卖工控网。

HP系例数字扭力测试仪说明书

任何先进的螺杆紧固工具，即使其扭力可以设定，其性能也不可能是完美无缺的。HP系例扭力测试仪就是用来测试旋转力矩的一种仪器。本扭力仪可以测定电动螺丝刀和扭力钳等工具的转动力矩，并且可与计算机通讯，构成自动控制的生产系统，精度高、易操作、成本低。已广泛应用于各种电气产品、相机、手表、摩托车和飞机等制造行业。

No matter how superior screw tightening tools are,ther do not function well unless the torque setting is controll,the series of JTM is instrument for setting the torque of electric screwdrivers,testing such tools as torque drivers and torque wrenches,measuring the torque of rotating parts,and also for systematizing extensive production contral process with computers,Designed as easy-to-operate,accurate,and economical tools,the series of JTM is widely used for products in many industries ranging from electronic equipments,cameras,watches and measuring instruments to automobiles and aircraft.

用途：

1 测量电动螺丝刀、各种扭力螺丝刀及扭刀扳手的扭刀设定。

2 用于检测各种电动螺丝刀、扭刀螺丝刀和扳手的扭刀大小，也可用于实验室中的检测和功能控制。

3 用于各种卡具和夹具等，例如：

*搜集穿孔螺杆的孔径资料。

*转动部分的扭力分类。

*控制瓶塞的紧度。

*小零件的破坏性试验。

*塑料螺杆及小零件的品质控制。

USES

1 For measuring the torque setting of electric screwdrives,torque drives and toreque wrenches.

2 For inspectiong the torque of electric screwdrives,torque drives,and wrenches,as well as for Laboratory inspection and function control.

3 For mainy other applications for which jig tools are devised.

*For collecting data on holes diameters prepared for tapping screws.

*For torque classifiers of rotating parts.

*For collecting bottle cap fastening.

*For testing breakdown of small parts.

*For quality control of plastic screws and parts.

特点/FEATURES：

●四位LCD（液晶）显示，读数清析准确。

Torque reading is simpale and accurate because torque is displayed on a clear digital display.

●在峰值保持功能时能显示测得的***值并保持显示。

By holding and displaying the peak torque value,you can set torque for tools precisely.

●扭力测试仪可顺时针或逆时针测量扭力，因此可方便地测量扭紧和扭松时的扭力。

Testers work both clockwise and counterclockwise,so you can easily measure torque while tightening and loosening pieces.

●结构简明、牢固，扭力仪直接与扭力测试部分相连。

The machanism is simple and robust because the strain gauge is directly attached to the torque detector.

●仪器符合统计程序控制系统。

Meters conform with the SPC(Statistical Process Control)system.

●模拟输出的多种应用：波形观察和测量数据的记录判断。

The analog output can be used for mainy applications,including wave from bservation,and

Recording and judgment of measured data.

●扭力测试仪结构紧凑、重量轻、使用可充电电池，携带方便。

Testers are easy to carry,they are compact,lightweight,and powered by a rechargeable battey.

外形简介/PARTS

通讯接口 模拟输出 充电插头 调零旋钮 单位选择开关

显示器 保持开关

电源开关

复位按钮

JTM—100 测量连接头

固定夹

★单位切换开关：磅力·英尺；公斤力·厘米；牛顿·米。

UNIT CONVERTER SWITCH：ｌｂｆ·Ｉｎ／ｋｇｆ·ｃｍ／N·ｍ。

★ 方式开关：峰值检测（PEAK）(由复位按钮清除保持的测量峰值)和跟踪检测（TRACK）。

MODE SWITCH：PEAK is the peak value of load;Can cleard by RESET button.TRACK reads changes corresponding to load variations.Canceled by releasing the load.

★ 测力连接头：连接待测物。

SOCKED：This socket is for attaching the device to be measured.

输出接口（RS—232C）

本扭力仪借助数据管理系统或个人计算机记录测量数据，和建立数据库，用于完成高质量的信息处理。本系统称之为“数据统计处理控制”。

OUTPUT CONNECTOR(RS-232C)

The meter performs recording of data,structring them into stistics,compute Processing and also can be connected to personal computers,thus can be developed to a high quality information processing system.This system is called SPC(Statistical Process Control).

精度调节器（部件）

精度调节器是一种缓冲高速旋转和吸收惯性的调节器。其效果相当于穿孔螺杆紧固时的作用。在测量离合型扭力控制电动螺丝刀的扭矩时，将该调节器放进平衡插座后启动螺丝刀，当离合装置脱离时，即测量得扭矩。

Fidaptor(accessory)

The fidaptor is an adaptor the buffers and absorbs the inertia occurring during high speed rotation.It reproduces almost the same effect as that in actual tapping screw fastening work..To control a clutch is disengged (automatically stopped).

测力传感联接头（部件）

附加调节头的标准形状是一个直径为5mm的轴耳，在待测螺丝刀连接头与轴耳不匹配时，可用互换轴耳做中间连接器。

注       意

本店产品价格都是未税价格，开发票需要加税点，普通发票加5%（总金额不少于100元），17%增值税发票需要加10%-12%（总金额不少于3000元），需要开发票的请联系客服加税点，谢谢