WOODWARD工业调速器5464-330调试步骤

易卖工控网（www.ymgk.com）提供”WOODWARD工业调速器5464-330调试步骤”，产品详情：品牌/厂家：woodward、型号：5464-330、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

产品描述Kollmorgen 64WKS-M240/50-RLG是一款晶体管逆变器。设备的额定电流为50安培rms。只有具备基本电工知识的合格人员才能安装设备。单个19英寸6U机架多可容纳四台64WKS-M240/50-RLG设备。该装置通过插入式端子或双头螺栓连接在后部。64WKS-M240/50-RLG设备的宽度为170毫米，因此3个外壳可以并排安装在600毫米的控制柜中。64WKS-M240/50-RLG的可用功能包括电路平滑电容器、辅助电源和中间电路的保险丝、四象限三相输出、两个额定值差动输入、三相直流或无刷转速表的输入、启用输入、PI速度和电流控制器、RLG和故障信号的前面板和LED显示屏。64WKS-M240/50-RLG的额定电源电压为三相60至172伏交流电。额定连接负载为9 kVA。中间线圈的额定直流电压为240伏交流电。额定输出电流为50安培。峰值输出电流为100安培。64WKS-M240/50-RLG的关断过电压阈值为325伏。输出电流的形状因子为1.01。次级电流控制电路的带宽为1千赫。输出级的时钟频率为8.5千赫。额定电流下的剩余电压降为4伏。64WKS-M240/50-RLG的机械规格包括5.1公斤的重量（包括紧凑型外壳）和296 x 390 x 165毫米的尺寸（包括紧凑式外壳）。电源信号连接到M6螺柱。实际面板包含RLG连接器，该连接器是子D9 pol连接器。额定值下的环境温度范围为0至45摄氏度
产品描述

MKD090B-085-KP0-AN数字同步电动机是多个MKD系列此类电动机中的一个。在运输和储存过程中，博世力士乐交流电机应始终保持水平方向干燥，无任何负载。必须使用配有吊索的起重机进行运输。该产品符合DIN 42950规范的B5设计。在安装设备之前，应检查电机法兰支架，确保其无毛刺。必须使用四个M10螺钉以51Nm的拧紧力矩固定此法兰。只有在干燥和断电状态下，才能连接和断开装置的插头。在使用电机时，必须将它们牢固地拧紧。

在操作之前，必须正确对齐和安装电机。本产品的电气连接应按照制造商的规范进行。其电缆螺纹接头也必须拧紧。由于灰尘、污垢或刨屑过多，设备功能往往会受到不利影响。根据DIN ISO 281规范，该装置的轴承使用寿命为30000小时。该产品具有高过载能力，因为从定子绕组到外壳外壁的散热效果理想。这辆汽车可以运往全球任何国家。



该装置必须安装在海拔1000米的地方。该单位在造纸和食品加工行业运营。绝不应使其在温度变化剧烈的区域发挥作用。当电机处于静止模式时，其持续扭矩为12Nm。当电机法兰插座盖安装有密封空气接头时，必须检查产品的O形圈是否正确就位。该设备的电源连接器包括用于保持制动器和温度传感器的连接。数字电机提供一年的保修支持。
Product Description
The MKD090B-085-KP0-AN digital synchronous motor is one of the multiple MKD series of such motors. This Bosch Rexroth AC motor should always be kept dry in horizontal orientation without any load during transport and storage. It must be transported using cranes equipped with lifting sling belts. The product complies with design B5 as per DIN 42950 specifications. The motor flange holder should be checked to see that it is free of burrs before the device is mounted. This flange must be fixed using four M10 screws with 51Nm tightening torque. The plug connectors of the unit should be connected and disconnected only in the dry and de-energized state. They have to be securely tightened when the motor is in use.

The motor must be aligned and mounted correctly before operation. The electric connections for this product should be done as per the manufacturer’s specifications. Its cable screw unions must also be tightened. The device functionality tends to get adversely affected due to excessive dust, dirt or shavings. The bearings of the unit have a lifespan of 30,000 hours according to DIN ISO 281 specifications. The product features high overload capability because of ideal heat dissipation from the windings of the stator to the exterior wall of its housing. The motor is shippable to any country across the globe.

The device must be installed at an altitude of 1,000m over sea level. The unit is operated in paper and food processing industries. It should never be made to function in areas where there is extreme temperature variation. The motor has a continuous torque of 12Nm when it is in standstill mode. It must be checked if the O-rings of the product are seated properly when the motor flange socket covers are mounted with a sealing air connector. The power connector of the device encompasses a connection for a holding brake and a temperature sensor. The digital motor comes with a year’s warranty support.