woodward调速器8440-1713/D具有控制的作用

易卖工控网（www.ymgk.com）提供”woodward调速器8440-1713/D具有控制的作用”，产品详情：品牌/厂家：woodward、型号：8440-1713/D、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

Modicon Quantum PLC是一款功能强大的大型模块化控制器，其总内存大小为256K至2M，用户逻辑大小为8K至2.9M（7M w/PCMCIA卡），寄存器大小为10K至128K，扩展寄存器为96K（7M w/PCMCIA卡。
Quantum PLC产品线支持热备用、本地、远程和分布式I/O配置，包括双电缆和多个网络选项。

140CPU4342U Quantum Unity本机处理器800 KB。与现有Quantum处理器140CPU4342A相同的CPU，此U CPU为Unity原生。Unity操作系统已下载，该CPU已准备好与Unity Pro软件一起使用。
140CPU31110 Unity Quantum处理器，带400 Kb处理器

140CPU65150 Unity Quantum处理器，512 Kb内存，用于程序和未分配数据，可通过PCMCIA扩展至7 MB；和以太网

140CPU65160 Unity Quantum处理器，768 Kb内存，用于程序和未分配数据，可通过PCMCIA扩展至7 MB；和以太网

140CPU67160 Unity Quantum热备用处理器，带768/7168K。Unity Quantum热备用处理器，带热备用光纤通信端口

490NOR00003光缆3m。MTRJ/MTRJ电缆，用于通过光纤端口将两个热备用Unity处理器连接在一起。

490NOR00015光缆15m。MTRJ/MTRJ电缆，用于通过光纤端口将两个热备用Unity处理器连接在一起

140CPU65160S基于140CPU65160的独立CPU

基于140CPU67160的140CPU67160S热备用CPU

140CPU11302量子控制器、256k RAM、8K用户逻辑、10K寄存器、1个ModBus和1个ModBusPlus端口，

140CPU11303量子控制器、512k RAM、16k用户逻辑、10K寄存器、1个ModBus和1个ModBusPlus端口

140CPU4342A量子控制器，486，2M SRAM，2个ModBus端口，1个ModBus Plus。钥匙开关至启动/内存保护/启动控制器

140CPU53414B量子控制器，2.5 MRAM，2个ModBus端口，1个ModBus Plus。数学协处理器。启动/内存保护/启动控制器按键开关

Modicon PLC施耐德PLC Telemecanique PLC
The IC697PWR748 is a 90W 48 VDC Power Supply Module by GE Fanuc for the 90-70 Series. It has three output voltages (+5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp) totaling 90 watts. The module features slide-in rack mount construction and two rack operation from a single power supply. This power supply is equipped with electronic short circuit overcurrent protection provided on a 5 volt bus.
This particular unit plugs into a 48-pin backplane-mounted connector (see leftmost slot in the rack). It delivers +5 volt, +12 volt, and -12 volt power. Logic level sequencing signals to the backplane. The IC697PWR748 power supply module can be used in a single rack application or, if the user prefers, it can provide power to a second rack. If the latter is chosen, it is important that the total load is within the supply rating.
Interconnection to the second rack is by way of a prewired cable (IC697CBL700). The power supply output will ride through a 10 ms total loss of input power at full load. Protection is delivered for overcurrent and overvoltage fault conditions. The power supply comes standard with an electronic overvoltage protection circuit which will clamp the output if the 5 V bus exceeds 6.7 volts. External overvoltage on the output will not cause the power supply fuse to open, but if an internal fault in the power supply caused the overvoltage condition, it is possible for the fuse to open. If the fuse needs replacement, a 5 amp, 250 volt 5x20 mm fuse should be used.