自营代理直线电缆147856-01

易卖工控网（www.ymgk.com）提供”代理直线电缆147856-01”，产品详情：品牌/厂家：BENTLY、型号：147856-01、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

147856-01当前负载24 VDC时大500 mA经销商有关您附近的ProSoft演示者列表，请访问工作温度-2010年50°C（-4至122*F）公司缓慢温度-4010 85°C（-40至185°F经销商：低调地放松5至95%（非冷通过电子邮件或传真将订单发送至：标准尺寸：5 20H X 2.07W X 4.52D英寸
北美/拉丁美洲/亚太地区（13.2厘米高x 5.25厘米宽x 1.48厘米深）DF1 Master/Slave to ASCII Generic Serial
Gateway5102-DFCM-ASCI13The DFCM-ASCII modules are the idea/ solution for themany applications where DF1 connectivity can be usedto integrate ASCII serial input devices into a system. TheDF1 gateway is a powerful module designed with bothMaster and Slave support, enabling easy connection toRockwell Automation PLCs (CLX, SLC, PLC, CPLX, andsimilar devices). In combination with the ASCII devicesupport, the module provides a very powerful interface tothe many ASCII devices which are in use in the industrial
marketplace today. Appl/ications for the module arefound in most industries, especially Manufacturing, Oil
and Gas, Electrical Power and Food Processing.How to Contact Us: Sales and SupportDF1主/从到ASCII通用串行网关
5102-DFCM-ASCI13DFCM-ASCII模块是可以使用DF1连接的许多应用将ASCII串行输入设备集成到系统中。这个DF1网关是一个功能强大的模块主设备和从设备支持，可轻松连接到罗克韦尔自动化PLC（CLX、SLC、PLC、CPLX和类似装置）。与ASCII设备结合使用支持，该模块为工业中使用的许多ASCII设备
今天的市场。模块的应用程序如下

在大多数行业，尤其是制造业、石油业

以及天然气、电力和食品加工。

如何联系我们：销售和支持
How to deal with the abnormal sound or vibration of ABB robot servo motor when it runs in repair of several faults?

Servo wiring:

Whether the power cable, encoder cable, control cable and cable are damaged; Check whether there are interference sources near the control line and whether they are parallel or too close to the nearby high current power cables; Check whether the potential of the grounding terminal changes suddenly to ensure excellent grounding.



Servo parameters:

If the servo gain is set too large, it is recommended to manually or actively adjust the servo parameters from the beginning; Acknowledge the setting of the time constant of the speed response filter. The initial value is 0, and you can test to increase the setting value; The electronic gear ratio is set too large, so it is recommended to restore to the factory setting; Resonance of servo system and mechanical system, test and adjust the frequency and amplitude of notch filter.



Mechanical system:

The coupling connecting the motor shaft and the equipment system deviates, and the mounting screws are not tightened; Poor engagement of pulleys or gears will also cause load torque changes. Test no-load operation. If it is normal during no-load operation, check whether the combination part of the mechanical system is abnormal; Recognize whether the load inertia, torque and speed are too large, and test the no-load operation. If the no-load operation is normal, reduce the load or replace the driver and motor with larger capacity. Application of Bently 3500 in steel, electric power, chemical and petrochemical industry and measuring points for vibration monitoring



The compressor belongs to the general equipment category, which is better used in steel, power, metallurgy, chemical, petrochemical and other enterprises. The following is a configuration example of Bentley vibration protection system used by the motor to drive the compressor unit through the gearbox for your reference.



Compressor unit: motor, gearbox, compressor



Typical vibration measuring points of Bently 3500 are arranged as follows:



The front and rear bearing boxes of the motor are equipped with shell vibration sensors to measure the j pair vibration of the motor bearings. The low speed end and gao speed end of the gearbox are respectively equipped with case vibration sensors to measure the j pair vibration of the gearbox. The front and rear X-Y direction eddy current sensor system of the compressor is used to monitor shaft vibration. In addition, a set of eddy current sensor system is also used to measure the compressor shaft displacement, and a set of eddy current sensor system is used to measure and monitor the key phase. The system configuration of the vibration monitoring product is as follows:



Centrifugal Compressor – Steam Turbine Drive



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Requirements for measuring point configuration



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration (optional): each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



Overspeed protection (optional): each compressor unit is equipped with three redundant overspeed protection measuring points, which are measured by 3300XL series eddy current sensors. 2. Bently 3500 configuration requirements



Each key compressor unit is equipped with Bentley 3500 frame; Bently 35003500/15 power module;



Bently 35003500/22M transient data interface module; Bently 35003500/25 Keyphasor Module



Bently Bently 35003500/42M monitor module for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), 3500/53 triple redundant monitoring module shall be used for overspeed protection monitoring measuring points, and each monitoring channel (shaft vibration, shaft displacement and bearing vibration) shall be configured with two relay output channels; Bently Bently 3500 3500/32 (4-channel) or 3500/33 (16 channel) relay module is adopted, Bently Bently 3500 3500/92Modbus communication gateway is adopted



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack.



Centrifugal Compressor – Motor Driven



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Bently 3500's requirements on the configuration of measuring points for vibration monitoring of the unit



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration: each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Bearing temperature (if applicable): each sliding support bearing and thrust bearing shall be equipped with bearing pad temperature measuring points; The working face and non working face of thrust bearing shall be equipped with temperature measuring points at the same time.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



2. Bently 3500 configuration requirements



Bently 3500 frame for each key compressor unit



Each Bently 3500 rack is configured with redundant 3500/15 power modules



3500/22M transient data interface module is configured in each Bentley 3500 rack;



For the above Keyphasor measurement points, the Bently 3500 rack of each unit is equipped with corresponding 3500/25 Keyphasor modules



The 3500/42M monitor module must be configured for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), the above bearing temperature measuring points need to be configured with corresponding 3500/60, 61 temperature monitoring modules, or 3500/62 process quantity monitoring modules



Each monitoring channel (shaft vibration, shaft displacement and bearing vibration) is equipped with two relay output channels of D-type; Use 3500/32 (4-channel) or 3500/33 (16 channel) relay modules



Each Bently 3500 rack is configured with a 3500/92Modbus communication gateway



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack.



screw compressor



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Bently measuring point configuration requirements



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration: each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Bearing temperature (if applicable): each sliding support bearing and thrust bearing shall be equipped with bearing pad temperature measuring points; The working face and non working face of thrust bearing shall be equipped with temperature measuring points at the same time.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



2.3500 Configuration requirements



Each key compressor unit is equipped with Bentley 3500 frame



Each Bently 3500 rack is configured with redundant 3500/15 power modules



3500/22M Transient Data Interface Module (RJ45 Network Interface) is configured in each Bentley 3500 rack



For the above Keyphasor measurement points, the Bently 3500 rack of each unit is equipped with corresponding 3500/25 Keyphasor modules



The 3500/42M monitor module must be configured for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), the above bearing temperature measuring points need to be configured with corresponding 3500/60, 61 temperature monitoring modules, or 3500/62 process quantity monitoring modules



Each monitoring channel (shaft vibration, shaft displacement and bearing vibration) is equipped with two relay output channels of D-type; Use 3500/32 (4-channel) or 3500/33 (16 channel) relay modules



Each Bently 3500 rack is configured with a 3500/92Modbus communication gateway



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack. API618 reciprocating compressor



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Requirements for measuring point configuration



Multi event Keyphasor: A multi event Keyphasor runner MEW is installed at the drive end of the reciprocating compressor to measure the Keyphasor reference signal of the reciprocating compressor. The multi event Keyphasor runner can be Bentley standard multi event runner MEW, or the reciprocating compressor manufacturer can customize and design the multi event Keyphasor runner according to Bentley's engineering experience in multi event Keyphasor runner based on its own equipment structure design characteristics. The multi event Keyphasor signal is measured by Bentley 3300XL series eddy current sensor.



Crankcase vibration: a vibration speed sensor is arranged on the horizontal axis of each main bearing between two cylinder rows of the reciprocating compressor crankcase to measure the crankcase body vibration. Bentley 330500 series Velomitor piezoelectric vibration speed sensor is used when the working speed of the reciprocating compressor is higher than 500 rpm; Bentley 190501VelomitorCT piezoelectric vibration speed sensor is used when the working speed is lower than 500rpm.



Crosshead vibration: redundant acceleration sensors are configured on the vertical plane at the midpoint of crosshead movement of each cylinder of the reciprocating compressor to monitor the impact event of reciprocating components; Bentley 330425 acceleration sensor is used for measurement.



Piston rod position: a pair of mutually perpendicular piston rod position measuring points shall be configured in the horizontal and vertical directions of each cylinder of the reciprocating compressor perpendicular to the piston rod plane; Bentley 3300XL series eddy current sensor is used for measurement. For reciprocating compression piston rod measurement.



Cylinder dynamic pressure: each cylinder of the reciprocating compressor is equipped with two cylinder pressure measuring points (suction and exhaust), which are measured by Bentley 165855 cylinder pressure sensor.



Bearing vibration: each main bearing in the crankcase of the reciprocating compressor is equipped with a speed sensor to measure the bearing vibration. Bentley 330500 series Velomitor piezoelectric vibration speed sensor is used when the working speed of the reciprocating compressor is higher than 500 rpm; Bentley 190501VelomitorCT piezoelectric vibration speed sensor is used when the working speed is lower than 500rpm.



Bearing temperature: each main bearing is equipped with a temperature sensor to measure the bearing temperature.



Air valve temperature: each air valve (suction valve and exhaust valve) of the reciprocating compressor cylinder is equipped with a temperature measuring valve temperature.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330,400 series piezoelectric vibration acceleration sensor is used for measurement.



Motor pad vibration: each rolling support bearing is equipped with two pad vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



2. Bently 3500 configuration requirements
In paper and board mills.. in a wide range of
the horizontal force component resulting from
converting operations... and in plants processing
web tension on a roll.
textiles, plastics, rubber or almost any web mate-
Several models and nominal loads are available
ial you can think of, you'll find ABB PillowBlock
in standard stainless steel constructions as well as
tension measurement systems.
in acid-resistant and mill- duty versions.
The performance of the PllowBlock load cells
The user-friendly digial signal-processing
is unsurpassed for applications characterized by
elecronics provides a high level of functionality to
heavy rll, high speeds and severe conditions - in cover a wide range of applications.
some instances they're the only viable option.
The key reason is the operating principle.
ABB Pillow Block load cells produce signals as a
result of magnetic change, which frees them from
the ineviable limitations and design compromises
of measurement technologies relying on some
form of physical movement.
The result is a load cell that combines srong,
low-impedance signal output with an exceedingly
stiff and rugged construction. A reliable, high-
performance load cell with exceptional resistance
to vibration, overloads, extreme temperatures and
otherwise harsh environments.