Velomitor电源模块套件123135-01

易卖工控网（www.ymgk.com）提供”Velomitor电源模块套件123135-01”，产品详情：品牌/厂家：BENTLY、型号：123135-01、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

接近传感器123135-01 The ASCII driver provides a powerful connection between the1577internal application database in the ProLinx unit and devices3000V DC min. port 1to ground and port tosupporting serial ASCII communications (bar code scanners, linelogic power isolationprinters, legacy teminal based computer systems, etc).Shipped wih Each UnilMini DIN lo DB- 9M serial cablesThe serial port on the gateway is userconfigurable to support ASCII4ft RS 232 configuration cablecommunications (Baud rate, Data Bits, Stop Bits, etc). The ASCI2.5mm screwdriver
port can act as a Master (Send ASCII strings) or as a Slave (ReceiveCD (docs and Conliguration uill)ASCII strings). or both.RS- 4221485 DB-9 to Screw TerminalASCII SpecificationsAdaplor (1 or 4, depending on ports)Avilable in up to four port configurations 1o0
ProSoft Configuration Builder
receive and/or transmil data.ProSoft Configuration Builder (PCB) provides a quick and easy way
Transmit and Receive255 byles eachto manage module configuration files customized to meet yourbufer size
application needs. PCB is not only a powerful solution for newTransmit character with0 to 65535 mllisecond delay between each
configuration files, but also alws you to import information frompacingtransmittled characler.previously intalldl (known working) configurations to new projects.
General Specifications
Additional Products
The ProLinx Communication Modules provide cnnetivity for two or
ProSoft Technology ofers a full complement of hardware and
more dssimilar network types. The modules, encased in sturdy
sofware slutions for a wide variety of industrial communication
extruded aluminum, are stand-alone DIN-rail mounted protocol
platforms.
gateways, providing communication between many of the most
widely used procols in industrial automation today.
Visit our web site at 
complete list of products.
Hardware Specifications
Specification
Description
Ordering Information
Power Supply
24 VDC nominal
To order this product, please use the fllowing:
18 to 36 VDC alowed
5102-DFCM-ASCII3
DF1 Master/Slave to ASCII Generic Serial
Postitive, Negative, GND Terminals
Gateway
2.5 mm screwdriver blade
To place an order, please contact your local ProSoft Technology
Current Load
500 mA 
distributor. For a list of ProSoft dsributors near you, go to
Operating Temperalure
-2010 50°C (-4 to 122*F)
htp:///w.w porof-technology.com
Slorage Temperalure
-4010 85°C (- 40 to 185*F)
Distributors:
Relalive Humidily
5 to 95% (non-condensing)
Place your order by email or fax to:
Dimensions
Standard: 5 20H X 2.07Wx 4.52D in.
North' American/Latin American I Asia Pacific
(13.2cmH x 5.25cmW x 1.48cmD)包括RS-422/485 scTew终端

ASCII码

串行端口隔离

每个UL的2500V RMS端口信号隔离

ASCII驱动程序在

1577

ProLinx单元和设备中的内部应用程序数据库

3000V DC小值，端口1至接地，端口至

支持串行ASCII通信（条形码扫描仪、线路

逻辑电源隔离

打印机、传统的基于终端的计算机系统等）。

与每个Unil一起装运

迷你DIN lo DB-9M串行电缆

网关上的串行端口可由用户配置以支持ASCII

4ft RS 232配置电缆

通信（波特率、数据位、停止位等）。ASCI

2.5mm螺丝刀

端口可以充当主端口（发送ASCII字符串）或从端口（接收

CD（文件和证书）

ASCII字符串）。或两者兼而有之。

RS-4221485 DB-9至螺钉端子

ASCII规范

Adaplor（1或4，取决于端口）

可在多达四个端口配置中飞行1 0

ProSoft配置生成器

接收和/或transmil数据。

ProSoft Configuration Builder（PCB）提供了一种快速简便的方法

发送和接收

每个255 byles

管理定制的模块配置文件，以满足

bufer尺寸

应用程序需求。PCB不仅是新产品的强大解决方案

使用传输字符

每个之间的0至65535毫秒延迟

配置文件，但也总是可以从中导入信息

起搏

传输字符。

以前的intalldl（已知工作）配置用于新项目。

一般规范

其他产品

ProLinx通信模块为两个或多个

ProSoft技术提供了完整的硬件和

更多dssimilable网络类型。模块封装在坚固的

用于各种工业通信的软件

挤压铝，是独立的DIN导轨安装协议

平台。

网关，提供大多数

当今工业自动化中广泛使用的procols。

访问我们的网站：htp://prosofp.t.chnology.co对于

完整的产品列表。

硬件规格

规格

描述

订购信息

电源

24 VDC标称值

要订购此产品，请使用以下步骤：

18至36伏直流电

5102-DFCM-ASCII3

DF1主/从到ASCII通用串行

正极、负极、GND端子

网关

2.5 mm螺丝刀刀片

要订购，请联系您当地的ProSoft Technology

当前负载

24 VDC时大500 mA

经销商有关您附近的ProSoft演示者列表，请访问

工作温度

-2010年50°C（-4至122*F）

htp:///w.wporof-technology.com公司

缓慢温度

-4010 85°C（-40至185°F）

经销商：

低调地放松

5至95%（非冷凝）

通过电子邮件或传真将订单发送至：

尺寸

标准尺寸：5 20H X 2.07W X 4.52D英寸。

北美/拉丁美洲/亚太地区

（13.2厘米高x 5.25厘米宽x 1.48厘米深）DF1 Master/Slave to ASCII Generic Serial
Gateway
5102-DFCM-ASCI13
The DFCM-ASCII modules are the idea/ solution for the
many applications where DF1 connectivity can be used
to integrate ASCII serial input devices into a system. The
DF1 gateway is a powerful module designed with both
Master and Slave support, enabling easy connection to
Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and
similar devices). In combination with the ASCII device
support, the module provides a very powerful interface to
the many ASCII devices which are in use in the industrial
marketplace today. Appl/ications for the module are
found in most industries, especially Manufacturing, Oil
and Gas, Electrical Power and Food Processing.
How to Contact Us: Sales and SupportDF1主/从到ASCII通用串行

网关

5102-DFCM-ASCI13

DFCM-ASCII模块是

可以使用DF1连接的许多应用

将ASCII串行输入设备集成到系统中。这个

DF1网关是一个功能强大的模块

主设备和从设备支持，可轻松连接到

罗克韦尔自动化PLC（CLX、SLC、PLC、CPLX和

类似装置）。与ASCII设备结合使用

支持，该模块为

工业中使用的许多ASCII设备

今天的市场。模块的应用程序如下

在大多数行业，尤其是制造业、石油业

以及天然气、电力和食品加工。

如何联系我们：销售和支持
How to deal with the abnormal sound or vibration of ABB robot servo motor when it runs in repair of several faults?

Servo wiring:

Whether the power cable, encoder cable, control cable and cable are damaged; Check whether there are interference sources near the control line and whether they are parallel or too close to the nearby high current power cables; Check whether the potential of the grounding terminal changes suddenly to ensure excellent grounding.



Servo parameters:

If the servo gain is set too large, it is recommended to manually or actively adjust the servo parameters from the beginning; Acknowledge the setting of the time constant of the speed response filter. The initial value is 0, and you can test to increase the setting value; The electronic gear ratio is set too large, so it is recommended to restore to the factory setting; Resonance of servo system and mechanical system, test and adjust the frequency and amplitude of notch filter.



Mechanical system:

The coupling connecting the motor shaft and the equipment system deviates, and the mounting screws are not tightened; Poor engagement of pulleys or gears will also cause load torque changes. Test no-load operation. If it is normal during no-load operation, check whether the combination part of the mechanical system is abnormal; Recognize whether the load inertia, torque and speed are too large, and test the no-load operation. If the no-load operation is normal, reduce the load or replace the driver and motor with larger capacity. Application of Bently 3500 in steel, electric power, chemical and petrochemical industry and measuring points for vibration monitoring



The compressor belongs to the general equipment category, which is better used in steel, power, metallurgy, chemical, petrochemical and other enterprises. The following is a configuration example of Bentley vibration protection system used by the motor to drive the compressor unit through the gearbox for your reference.



Compressor unit: motor, gearbox, compressor



Typical vibration measuring points of Bently 3500 are arranged as follows:



The front and rear bearing boxes of the motor are equipped with shell vibration sensors to measure the j pair vibration of the motor bearings. The low speed end and gao speed end of the gearbox are respectively equipped with case vibration sensors to measure the j pair vibration of the gearbox. The front and rear X-Y direction eddy current sensor system of the compressor is used to monitor shaft vibration. In addition, a set of eddy current sensor system is also used to measure the compressor shaft displacement, and a set of eddy current sensor system is used to measure and monitor the key phase. The system configuration of the vibration monitoring product is as follows:



Centrifugal Compressor – Steam Turbine Drive



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Requirements for measuring point configuration



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration (optional): each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



Overspeed protection (optional): each compressor unit is equipped with three redundant overspeed protection measuring points, which are measured by 3300XL series eddy current sensors. 2. Bently 3500 configuration requirements



Each key compressor unit is equipped with Bentley 3500 frame; Bently 35003500/15 power module;



Bently 35003500/22M transient data interface module; Bently 35003500/25 Keyphasor Module



Bently Bently 35003500/42M monitor module for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), 3500/53 triple redundant monitoring module shall be used for overspeed protection monitoring measuring points, and each monitoring channel (shaft vibration, shaft displacement and bearing vibration) shall be configured with two relay output channels; Bently Bently 3500 3500/32 (4-channel) or 3500/33 (16 channel) relay module is adopted, Bently Bently 3500 3500/92Modbus communication gateway is adopted



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack.



Centrifugal Compressor – Motor Driven



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Bently 3500's requirements on the configuration of measuring points for vibration monitoring of the unit



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration: each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Bearing temperature (if applicable): each sliding support bearing and thrust bearing shall be equipped with bearing pad temperature measuring points; The working face and non working face of thrust bearing shall be equipped with temperature measuring points at the same time.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



2. Bently 3500 configuration requirements



Bently 3500 frame for each key compressor unit



Each Bently 3500 rack is configured with redundant 3500/15 power modules



3500/22M transient data interface module is configured in each Bentley 3500 rack;



For the above Keyphasor measurement points, the Bently 3500 rack of each unit is equipped with corresponding 3500/25 Keyphasor modules



The 3500/42M monitor module must be configured for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), the above bearing temperature measuring points need to be configured with corresponding 3500/60, 61 temperature monitoring modules, or 3500/62 process quantity monitoring modules



Each monitoring channel (shaft vibration, shaft displacement and bearing vibration) is equipped with two relay output channels of D-type; Use 3500/32 (4-channel) or 3500/33 (16 channel) relay modules



Each Bently 3500 rack is configured with a 3500/92Modbus communication gateway



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack.



screw compressor



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Bently measuring point configuration requirements



Keyphasor: each shafting of the compressor unit at the same speed is equipped with a Keyphasor measuring point; Bentley 3300XL series eddy current sensor is used for measurement.



Shaft vibration: each sliding support bearing is equipped with a pair of shaft vibration measuring points in X/Y direction (installed vertically to each other), which are measured by Bentley 3300XL series eddy current sensors.



Axial displacement: each thrust bearing of the compressor unit is equipped with double redundant axial displacement measuring points; Bentley 3300XL series eddy current sensor is used for measurement.



Bearing vibration: each rolling support bearing is equipped with two bearing vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



Bearing temperature (if applicable): each sliding support bearing and thrust bearing shall be equipped with bearing pad temperature measuring points; The working face and non working face of thrust bearing shall be equipped with temperature measuring points at the same time.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330400 series piezoelectric vibration acceleration sensor is used for measurement.



2.3500 Configuration requirements



Each key compressor unit is equipped with Bentley 3500 frame



Each Bently 3500 rack is configured with redundant 3500/15 power modules



3500/22M Transient Data Interface Module (RJ45 Network Interface) is configured in each Bentley 3500 rack



For the above Keyphasor measurement points, the Bently 3500 rack of each unit is equipped with corresponding 3500/25 Keyphasor modules



The 3500/42M monitor module must be configured for the above measuring points of shaft vibration, shaft displacement, bearing vibration and shell vibration



(If applicable), the above bearing temperature measuring points need to be configured with corresponding 3500/60, 61 temperature monitoring modules, or 3500/62 process quantity monitoring modules



Each monitoring channel (shaft vibration, shaft displacement and bearing vibration) is equipped with two relay output channels of D-type; Use 3500/32 (4-channel) or 3500/33 (16 channel) relay modules



Each Bently 3500 rack is configured with a 3500/92Modbus communication gateway



For units working in hazardous areas, 3500 monitor modules connected to field signals shall be equipped with built-in safety barriers; 3500/04 intrinsically safe grounding module shall be configured in the 3500 rack. API618 reciprocating compressor



For units working in hazardous areas, Bentley sensors and monitoring systems should have the option of multi agency approval units. There is no requirement for the units working in the safe area.



1. Requirements for measuring point configuration



Multi event Keyphasor: A multi event Keyphasor runner MEW is installed at the drive end of the reciprocating compressor to measure the Keyphasor reference signal of the reciprocating compressor. The multi event Keyphasor runner can be Bentley standard multi event runner MEW, or the reciprocating compressor manufacturer can customize and design the multi event Keyphasor runner according to Bentley's engineering experience in multi event Keyphasor runner based on its own equipment structure design characteristics. The multi event Keyphasor signal is measured by Bentley 3300XL series eddy current sensor.



Crankcase vibration: a vibration speed sensor is arranged on the horizontal axis of each main bearing between two cylinder rows of the reciprocating compressor crankcase to measure the crankcase body vibration. Bentley 330500 series Velomitor piezoelectric vibration speed sensor is used when the working speed of the reciprocating compressor is higher than 500 rpm; Bentley 190501VelomitorCT piezoelectric vibration speed sensor is used when the working speed is lower than 500rpm.



Crosshead vibration: redundant acceleration sensors are configured on the vertical plane at the midpoint of crosshead movement of each cylinder of the reciprocating compressor to monitor the impact event of reciprocating components; Bentley 330425 acceleration sensor is used for measurement.



Piston rod position: a pair of mutually perpendicular piston rod position measuring points shall be configured in the horizontal and vertical directions of each cylinder of the reciprocating compressor perpendicular to the piston rod plane; Bentley 3300XL series eddy current sensor is used for measurement. For reciprocating compression piston rod measurement.



Cylinder dynamic pressure: each cylinder of the reciprocating compressor is equipped with two cylinder pressure measuring points (suction and exhaust), which are measured by Bentley 165855 cylinder pressure sensor.



Bearing vibration: each main bearing in the crankcase of the reciprocating compressor is equipped with a speed sensor to measure the bearing vibration. Bentley 330500 series Velomitor piezoelectric vibration speed sensor is used when the working speed of the reciprocating compressor is higher than 500 rpm; Bentley 190501VelomitorCT piezoelectric vibration speed sensor is used when the working speed is lower than 500rpm.



Bearing temperature: each main bearing is equipped with a temperature sensor to measure the bearing temperature.



Air valve temperature: each air valve (suction valve and exhaust valve) of the reciprocating compressor cylinder is equipped with a temperature measuring valve temperature.



Gearbox shell vibration (if applicable): a pair of X/Y direction shell vibration measuring points shall be provided at the support bearings of input and output shafts of each gearbox; Bentley 330,400 series piezoelectric vibration acceleration sensor is used for measurement.



Motor pad vibration: each rolling support bearing is equipped with two pad vibration measuring points (installed horizontally and vertically), which are measured by Bentley 330500 series Velomitor piezoelectric vibration velocity sensor.



2. Bently 3500 configuration requirements
In paper and board mills.. in a wide range of
the horizontal force component resulting from
converting operations... and in plants processing
web tension on a roll.