自营DS200ADGIH1AAA电气通用备件模块GE

易卖工控网（www.ymgk.com）提供”DS200ADGIH1AAA电气通用备件模块GE”，产品详情：品牌/厂家：GE、型号：DS200ADGIH1AAA、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

DS200ADGIH1AAA

ACC-5595 is a managed hub designed to operate with our 5565 family of Reflective Memory real-time network products. The Reflective Memory hub can automatically bypass ports when it detects a loss of signal or the loss of valid synchronization patterns, allowing the other nodes in the network to remain operational.

• Automatic bypass can be optionally controlled by the loss of signal or by the loss of sync pattern
• Automatically bypasses defective or disconnected nodes in a fiber-optic network

IS200STCIH2A is a multilayer PCB populated with SMD components and connectors. One part of the termination block is a removable connector. STCI  terminal boards are available in different revisions also.

Reliability

IS200STCIH2A board is very reliable and so less prone to damage. But the improper handling and poor storage can affect the functionality of the card. So that we recommend keeping the cards in static sensitive storage boxes in recommended conditions.

Repair
If you experience any issue with IS200STCIH2A, we can quickly test, diagnose and fix it. Expedite repair option is also available for IS200STCIH2A. The cards are repaired using proper tools and experts in a controlled environment. All the parts needed for repairing IS200STCIH6A are in our stock. We also ensure that the replacement components are industrial grade and meet or exceed OEM standards. FVT tested all repairs and comes with a warranty.

Refurbishing
Proper refurbishing of the IS200STCIH2A circuit board can increase its longevity also.

The refurbishing process includes,

Replacing all aging and commonly failing components.

Applying TIL modification if there is any.

Reflowing solder to eliminate dry solder.

Thorough Industrial standard cleaning of the card.

Applying a protective coating, etc.

Functional Verification Test.
We also carry out the FUNCTIONAL VERIFICATION TEST of IS200STCIH2A in an actual OEM system setup. We will individually verify all inputs and outputs for their functionality. Depending on the board, we do load testing also to ensure the proper stability of the board.IS200STCIH2A标准

IS200STCIH2A是Mark VIE端子板。该板用外部I/O端接。这主要用于GE Speedtronic Mark VIE系列。此外，Mark VIE是一个灵活的多应用平台。它还为单工、双冗余和三冗余系统提供高速网络I/O。



IS200STCIH2A是一种填充有SMD组件和连接器的多层PCB。接线板的一部分是可拆卸连接器。STCI端子板也有不同版本。



可靠性



IS200STCIH2A板非常可靠，因此不易损坏。但操作不当和存储不良会影响卡的功能。因此，我们建议在建议的条件下将卡存放在静电敏感存储箱中。



修理

如果您遇到IS200STCIH2A的任何问题，我们可以快速测试、诊断并修复它。IS200STCIH2A也提供快速维修选项。在受控环境下，使用适当的工具和专家修复这些卡。维修IS200STCIH6A所需的所有零件都在我们的库存中。我们还确保更换部件为工业级，并达到或超过OEM标准。FVT测试了所有维修，并提供保修。



翻新

适当翻新IS200STCIH2A电路板也可以延长其寿命。



翻新过程包括：，



更换所有老化和常见故障部件。



应用TIL修改（如果有）。



回流焊料以消除干焊料。



卡片的彻底工业标准清洁。



涂抹保护涂层等。



功能验证测试。

我们还在实际OEM系统设置中执行IS200STCIH2A的功能验证测试。我们将单独验证所有输入和输出的功能。根据电路板，我们还进行负载测试，以确保电路板的适当稳定性。



电路板处理。

IS200STCIH2A是一种静电敏感板。我们还建议尽量减少与PCB的接触，尤其是在导电区域。如果您需要直接握住它们，请将它们放在边缘并戴上防静电手套。这些装置需要采取适当的ESD安全预防措施。

IS200STCIH2A是GE根据Mark VI系列开发的单触点输入端子板。Simplex Contact Input端子板是一种小触点输入端子板，设计用于DIN导轨或平面安装。该板接受来自外部电源的24触点输入，标称24、48和125 V dc励磁。触点输入具有噪声抑制功能，以防止浪涌和高频噪声。PAIC I/O块与模块兼容。I/O块插入D型连接器，并通过以太网与控制器通信。仅支持单工系统。



IS200STCIH2A安装

STCI与塑料绝缘体一起安装在钣金托架上，然后将其安装在DIN导轨上。

STCI加绝缘体可以安装在金属板组件上，然后用螺栓固定在机柜中。触点输入通常使用#18 AWG电线直接连接至接线板。

护罩应端接在单独的支架上。STCIH2有一个直角集管，可接受各种商用可插拔接线端子，共52个端子。

活动

功能和车载信号调节与TBCI上的相同，但它们适用于24、48和125 V dc励磁。输入励磁范围分别为16至32 V dc、32至64 V dc和100至145 V dc。阈值电压为励磁电压的50%。图中显示了触点感应电路。在前21个电路上，触点输入电流限制为2.5 mA，在电路22至24上限制为10 mA。

通过重置聚合物正温度系数保险丝，24 V直流电源的电流限制为0.5 A。滤波器可降低高频噪声，并抑制信号输入点附近每个输入端的浪涌。离散输入电压信号被路由到I/O处理器，后者将其转换为数字信号并发送给控制器。

IS200STCIH2A特性

E1和E2是端子板两侧端子环上的标签。

一个37针（内螺纹）D型连接器和一个三位内螺纹插头与电路板上的端子排相对。

在木板的短边上，在木板上切下两个圆孔，一个相对另一个。板上还有80多个电阻器、电容器、二极管和单个集成电路。

产品属性

可用通道数-24个干接触电压输入通道。

标称励磁电压为24 V dc，浮动，范围为18.5至32 V dc（可插拔TB）

电流输入-对于需要24 V dc的应用：前21个电路消耗2.5 mA，而0后三个消耗10 mA。

输入硬件滤波器，4 ms

I/O板故障检测-触点输入处的励磁电压损失，在测试模式下不响应的触点输入

GE Speedtronic Mark VIe控制器更换部件的0广泛分类可在控制世界找到。我们的专家可以随时帮助您满足Mark VIe要求。IS200STCIH2A Installation
The STCI, along with a plastic insulator, is mounted on a sheet metal carrier, which is then mounted on a DIN rail.
The STCI plus insulator can be mounted on a sheet metal assembly, which is then bolted into a cabinet. The contact inputs are typically wired directly to the terminal block using #18 AWG wires.
Shields should be terminated on a separate bracket. STCIH2 has a right-angle header that accepts a variety of commercially available pluggable terminal blocks, totaling 52 terminals.
Operation
The function and on-board signal conditioning are the same as on TBCI, but they are scaled for 24, 48, and 125 V dc excitation. The input excitation ranges are 16 to 32 V dc, 32 to 64 V dc, and 100 to 145 V dc, respectively. The threshold voltage is 50% of the excitation voltage. The figure shows the contact sensing circuits. Contact input currents are limited to 2.5 mA on the first 21 circuits and 10 mA on circuits 22 through 24.
The 24 V dc power supply is current limited to 0.5 A by resetting polymer positive temperature coefficient fuses. Filters reduce high-frequency noise and suppress surge on each input near the point of signal entry. The discrete input voltage signals are routed to the I/O processor, which converts them to digital signals and sends them to the controller.
IS200STCIH2A Characteristics
E1 and E2 are the labels on the terminal ring on either side of the terminal board.