IC640HWP706模块备件

易卖工控网（www.ymgk.com）提供”IC640HWP706模块备件”，产品详情：品牌/厂家：Associated-507967、型号：IC640HWP706、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

IC640HWP706

此版本的重要产品信息
新的CPU功能和增强功能
RX7i CPU的3.60版提供了以下支持：
IC698CPE040 CPU（1800 MHz），具有64 MB用户内存和64 MB用户闪存
IC698CPE030 CPU（600 MHz），具有64 MB用户内存和64 MB用户闪存
新的以太网功能和增强功能
RX7i以太网接口的3.60版提供了以下功能和增强。
Modbus/TCP客户端
PACS系统中增加了Modbus/TCP客户端功能。Modbus/TCP客户端支持Modbus一致性
0类功能代码3和16、符合性1类功能代码1、2、4、5、6和7以及符合性2类功能代码
代码15、22、23和24。PACSystems Ethernet支持所有客户端协议之间共享的32个客户端连接。对于
例如，如果SRTP信道使用16个客户端连接，则Modbus/TCP可使用16个客户机连接
频道。任何给定信道一次只能分配给一个协议。
以太网子板引导加载程序固件
以太网子板引导加载程序固件已更新，以支持以太网插件应用程序。
CPU限制和开放问题
主题描述
电池安装安装安装新电池时，如果当前未安装电池，则必须更换电池
在CPU通电时安装。如果不遵循此过程，可能会导致CPU无法正常工作
通电。
如果在断电时安装了电池（且之前未安装电池），以及
CPU无法通电，只需卸下电池，重启CPU，然后安装
电池。
以太网断开
在逐字逐句的过程中
改变
如果在逐字更改期间以太网连接断开，程序员可能不会
允许在重新连接后进行后续逐字更改，因为它认为
另一个程序员当前已连接。如果发生这种情况，您应该先脱机，然后再返回
再次在线。
非GE Fanuc VME
作为VME运行的模块
大师
作为VME总线主控器运行的非GE Fanuc VME模块尚未通过测试
RX7i。对集成此类功能感兴趣的用户应联系技术支持。
商店
配置多个
GBCs
两次存储包含两个或多个GBC的硬件配置可能会导致一个GBC失效
配置失败。清除存储之间的硬件配置将防止此故障
从生成开始。
同时清除，
不加载和存储
支持
目前，RX7i不支持多个程序员同时更改CPU内容
同时。编程软件可能在操作期间产生错误。
RX7i CPU 5
GFK-2438A
主题描述
故障报告
模拟扩展器
对于在90-70系列扩展机架中使用模拟扩展器时的故障报告
当ALG230基本模块位于插槽2中且扩展模块处于打开状态时，存在特殊情况
出现在插槽9中。在这种情况下，如果任何扩展器模块与基座失去通信
模块，则该扩展器所有16个通道的故障报告显示插槽号为
0.电路号为9到120之间的值，如下表所示。I/O
每个频道的参考地址显示为空白。
时隙扩展器电路号
3 1 9-24
4 2 25-40
5 3 41-56
6 4 57-72
7 5 73-88
8 6 89-104
9 7 105-120
对于在PACSystems RX7i机架中使用模拟扩展器时的故障报告，特殊的
当底座位于槽4中且槽11中存在扩展器时，存在这种情况。在这种情况下
故障扩展器的插槽编号始终显示为插槽2，电路编号将显示
根据扩展器使用的插槽显示，如下表所示。I/O
每个频道的参考地址显示为空白。
槽电路编号
6 25-40
7 41-56
8 57
%W： 可配置至大可用用户RAM
托管内存（符号和I/O变量组合）：
多可配置10兆字节
以太网接口规范
基于Web的数据监控多达16个Web服务器和FTP连接（组合）
以太网数据速率为10Mb/秒和100Mb/秒
物理接口10BaseT RJ45
WinLoader支持：是
基于EGD配置的页面数255
SNTP的时间同步
选择性消费EGD：是
将EGD配置从PLC加载到
程序员
对
通过UDP的远程站管理器：是
本地站管理器（RS-232）专用RS-232端口
可配置级用户参数是
RX7i CPU 3
GFK-2438A
发布历史
目录号日期CPU固件版本以太网固件版本注释
IC698CPE040-AA 2005年12月CPU:3.60以太网：3.60初始版本
IC698CPE030-AA 2006年4月CPU:3.60以太网：3.60初始版本
CPU功能兼容性
主题描述
编程器版本
要求
获利™ 必须使用Machine Edition Logic Developer PLC 5.5 SIM 6或更版本进行以下操作：
版本3.60新增功能。
C工具包兼容性：PACSy中的新功能需要C工具包版本3.50版本34A1

IC640HWP706

IC640HWP706

Important Product Information for this Release
New CPU Features and Enhancements
Release 3.60 of the RX7i CPUs provides support for:
 IC698CPE040 CPU (1800 MHz) with 64 MB of user memory and 64 MB of user flash
 IC698CPE030 CPU (600 MHz) with 64 MB of user memory and 64 MB of user flash
New Ethernet Features and Enhancements
Release 3.60 of the RX7i Ethernet interfaces provides the following features and enhancements.
Modbus/TCP Client
Modbus/TCP Client capability has been added to PACSystems. The Modbus/TCP Client supports Modbus Conformance
Class 0 function codes 3 and 16, Conformance Class 1 function codes 1, 2, 4, 5, 6, and 7, and Conformance Class 2 function
codes 15, 22, 23, and 24. PACSystems Ethernet supports 32 Client connections shared between all Client protocols. For
example, if 16 Client connections are used for SRTP Channels, 16 Client connections are available for Modbus/TCP
Channels. Any given channel can be assigned to only one protocol at a time.
Ethernet Daughterboard BootLoader Firmware
The Ethernet Daughterboard BootLoader firmware was updated to support Ethernet Plug-in Applications.
CPU Restrictions and Open Issues
Subject Description
Battery installation When installing a new battery, when there currently is no battery installed, the battery must be
installed while the CPU has power. Failing to follow this procedure could result in the CPU not
powering up.
If a battery is installed while power is off (and there was no battery previously installed), and
the CPU fails to power up, simply remove the battery, power cycle the CPU and then install
the battery.
Ethernet Disconnect
During Word for Word
Change
If the Ethernet connection is broken during a word-for-word change, the programmer may not
allow a subsequent word-for-word change after reconnecting due to the fact that it thinks
another programmer is currently attached. If this occurs, you should go offline and then back
online again.
Non-GE Fanuc VME
Modules Operating as VME
Masters
Non-GE Fanuc VME modules operating as VME bus masters have not been tested with the
RX7i. Users interested in integrating this type of functionality should contact technical support.
Store of Hardware
Configuration with Multiple
GBCs
Storing a hardware configuration containing two or more GBCs twice may cause one GBC to
fail configuration. Clearing the hardware configuration between stores will prevent this fault
from being generated.
Simultaneous Clears,
Loads and Stores not
Supported
Currently, the RX7i does not support multiple programmers changing CPU contents at the
same time. The programming software may generate an error during the operation. 
RX7i CPU 5
GFK-2438A
Subject Description
Fault Reporting With
Analog Expanders
For fault reporting when an analog expander is used in a Series 90-70 Expansion Rack, a
special case exists when the ALG230 base module is in slot 2 and an expander module is
present in slot 9. In this case, if any expander module loses communication with the base
module, then the fault reports for all 16 channels for that expander display the slot number as
0. The circuit number will be a value from 9 to 120, as shown in the following table. The I/O
reference address for each channel is displayed as blank.
 SLOT EXPANDER CIRCUIT NUMBERS
 3 1 9-24
 4 2 25-40
 5 3 41-56
 6 4 57-72
 7 5 73-88
 8 6 89-104
 9 7 105-120
For fault reporting when an analog expander is used in a PACSystems RX7i rack, a special
case exists when the base is in slot 4 and an expander is present in slot 11. In this case, the
slot number for a faulty expander is always displayed as slot 2, and the circuit number will
display according to the slot used for the expander, as shown in the following table. The I/O
reference address for each channel is displayed as blank.
 SLOT CIRCUIT NUMBERS
 6 25-40
 7 41-56
 8 57
%W: configurable up to the maximum available user RAM
Managed memory (Symbolic and I/O variables combined):
configurable up to 10 Mbytes
Ethernet Interface Specifications
 Web-based data monitoring Up to 16 web server and FTP connections (combined)
 Ethernet data rate 10Mb/sec and 100Mb/sec
 Physical interface 10BaseT RJ45
 WinLoader support Yes
 Number of EGD configuration-based pages 255
 Time synchronization SNTP
 Selective consumption of EGD Yes
 Load EGD configuration from PLC to
 programmer
Yes
 Remote Station Manager over UDP Yes
 Local Station Manager (RS-232) Dedicated RS-232 port
 Configurable Advanced User Parameters Yes 
RX7i CPU 3
GFK-2438A
Release History
Catalog Number Date CPU Firmware Version Ethernet Firmware Version Comments
IC698CPE040-AA Dec. 2005 CPU: 3.60 Ethernet: 3.60 Initial Release
IC698CPE030-AA April 2006 CPU: 3.60 Ethernet: 3.60 Initial Release
CPU Functional Compatibility
Subject Description
Programmer Version
Requirements
Proficy™ Machine Edition Logic Developer PLC 5.5 SIM 6 or later must be used for
Release 3.60 new features.
C Toolkit Compatibility C Toolkit Release 3.50 Build 34A1 is required for new features in PACSystems Release 3.50
(Use of variables in C Blocks).
Battery Pack
Compatibility
The Auxiliary Battery Module (IC693ACC302A) must be used with the PACSystems RX7i
CPE030/CPE040 CPU for memory retention. The RX7i three-cell lithium battery pack
(IC698ACC701) cannot be used with the CPE030 and CPE040 CPUs.
Series 90-70 Expansion
Rack Compatibility
Series 90-70 expansion racks are supported by the PACSystems RX7i.
PACSystems RX7i CPUs and the RX7i Ethernet Module do not operate in a Series 90-70 rack.
Series 90-70 Main Rack
Compatibility
Series 90-70 Main Racks cannot be used in a PACSystems RX7i system.
PACSystems RX7i CPUs and the RX7i Ethernet Module do not operate in a Series 90-70 rack.
Series 90-70 Module
Compatibility
For a list of modules supported by the RX7i CPUs, refer to the PACSystems RX7i Installation
Manual, GFK-2223.
Insulating Strips for High
Voltage Modules
An insulator strip is required on a high voltage module that is installed to the immediate right of
a module with a metal faceplate. Insulating strips should be installed on the following modules
that have versions earlier than:
IC697MDL240D IC697MDL640E
IC697MDL241D IC697MDL340G
IC697MDL250G IC697MDL341E
IC697MDL251E IC697MDL350F
Note: Current versions of these modules are shipped with the insulators installed. The strip
is visible on the back of the printed wiring assembly. The RX7i rack is shipped with an Insulator
Kit that includes enough parts to update three Series 90-70 I/O modules, a BEM713 (Bus
Transmitter) module, and a BEM731 (Genius Bus Controller) module.
Ethernet Functional Compatibility
Subject Description
SRTP and EGD Performance Differs
from Series 90-70
SRTP and EGD performance in the RX7i differs slightly from the Series 90-70.
Each RX7i Ethernet Interface supports a greater number of SRTP connections and
EGD exchanges.
Please also note that the RX7i currently has several SRTP and EGD operational
restrictions when compared to the Series 90-70. When migrating Series 90-70
Ethernet applications to the RX7i, please carefully read the "Ethernet Operational
Notes” section on page 10.
Series 90-70 LAN Interface Modules
(IC697CMM741 and IC697CMM742)
not Supported by RX7i
Please note that the Series 90-70 LAN Interface Modules (IC697CMM741 and
IC697CMM742) are not supported by the RX7i and should not be placed in an
RX7i rack. The RX7i CPU contains an embedded Ethernet Interface. If additional
Ethernet Interfaces are required, the RX7i Ethernet Module (IC698ETM001) should
be used.
Programmer Version Requirements Proficy Machine Edition Logic Developer PLC 5.0 Service Pack 3 or later must be
used to program the PLC CPU for Modbus/TCP operation