0010-25341-501932模块备件

易卖工控网（www.ymgk.com）提供”0010-25341-501932模块备件”，产品详情：品牌/厂家：0040-32460-504815、型号：0010-25341-501932、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

0010-25341-501932

MVME5500是
VME产品旗舰
支持更级别的线路
在单个
VMEbus插槽
MPC7457 PowerPC®处理器
1 GHz时
512KB片上二级缓存和
2MB三级缓存
用于性能计算的AltiVec协处理器
应用
512MB车载133 MHz
SDRAM ECC内存和
512MB额外内存通过
用于
总计1GB内存
两排焊接闪光
内存（32MB和8MB）
双独立64位PCI
总线和带有总线的PMC站点
速度达66 MHz
千兆以太网接口升级版
额外的10/100BaseTX
以太网接口
64位PCI扩展夹层
多允许四个连接器
更多PMC
输入/输出兼容性
MVME51xx系列
单个VME插槽，即使已满
配置有两个PMC模块或一个PMC模块和一个
附加内存夹层
支持处理器PMC
（PrPMCs）
n
n
n
n
n
n
n
n
n
n
n
艾默生网络电源MVME5500系列旨在满足
原始设备制造商，包括国防和航空航天、工业自动化和医疗领域的原始设备制造商
成像细分市场。寻求技术更新的客户
应用程序，同时保持与其现有VMEbus的向后兼容性
基础设施可以升级到MVME5500系列，并利用
增强的性能功能。
MVME5500使用运行在1 GHz的MPC7457处理器，非常适合
数据密集型应用程序。MVME5500提供的不仅仅是更好的处理器
表演它还从处理器、内存、，
双独立本地总线和输入/输出子系统。
强大的Marvell系统控制器，支持133 MHz主机总线和
133 MHz SDRAM内存总线与速处理器匹配良好。到
将系统输入/输出与出色的处理器性能MVME5500相匹配
提供双64位、33/66 MHz PCI总线。每个PCI总线都有一个PMC站点支持
运行频率为33或66 MHz的卡。Universe II VME接口和PMCspan连接器与专用33 MHz PCI总线段上的PMC站点隔离，以便
两个PMC站点都能够运行66 MHz。
MVME5500还提供千兆以太网接口，即10/100BaseTX以太网
接口和两个串行端口。所有这些加起来就是一组平衡良好的，
性能子系统具有无与伦比的性能。
MVME5500系列
VMEbus单板计算机
头版
内部页面
2.
MVME5500框图
向后兼容性
MVME5500延续了艾默生的发展方向
从MVME5100系列开始提供
Emerson嵌入式控制器的迁移路径
和单板计算机（SBC）连接到单个
站台此迁移路径使原始设备制造商能够
在相同的基础上支持不同的I/O需求
平台，简化零件号维护，
技术专业要求和备件。
MVME5500系列为客户提供了一个迁移
MVME2300、MVME2400、MVME2600、，
MVME2700和MVME5100板，使其能够
利用MPC7455等功能
处理器、千兆以太网和双独立
33/66 MHz PMC站点。
IPMC模块
IPMC761和IPMC712是可选的附加PMC
提供向后兼容性的模块
上一代艾默生产品（如
IPMC模式下的MVME2600、MVME2700和MVME5100）
使用MVME761或MVME712M转换模块。
IPMC模块为以下各项提供后部输入/输出支持：
通信2
平面
EIA232
通用异步收发器
通信1
FP输入/输出
–A32/D64位
A32/D64位，133 MHz
–A32/D64位
66 MHz PCI本地总线
66 MHz PCI本地总线
–A32/D64位
33 MHz PCI本地总线
端口2
10/100BaseTX
FP输入/输出
端口1
10/100/1000
BaseTX公司
FP输入/输出
PMC
FP输入/输出
PMC
FP输入/输出
EIA232
P2 P1
电池
宇宙II
通用异步收发器
三级缓存
2MB
以太网
10/100BaseTX
物理层
SDRAM
夹层
512MB
千兆位
以太网
控制器
PMC
插槽2
NVRAM
RTC公司
PCI
桥
闪光
32MB
（焊接）
8MB
（焊接）
MPC7457
1千兆赫
PMCspan
连接器
SDRAM
133兆赫
512 MB
PCI桥&
内存控制器
发现
IPMC
插槽1
一个单端超宽SCSI端口
一个并行端口
四个串行端口（两个或三个异步端口和一个或两个
同步/异步，取决于模块）
安装了IPMC后，一个PMC插槽仍然可用，
为OEM产品定制提供支持。
P2输入/输出模式
MVME5500系列支持两个跳线配置
P2输入/输出模式：PMC模式和IPMC模式。PMC模式
向后兼容MVME2300/
PMC模式下的MVME2400和MVME5100。在PMC中
模式，PMC插槽1的64个引脚和PMC的46个引脚
P2上的插槽2可用于IPMC中的PMC后部输入/输出
模式，MVME5500系列支持传统
MVME761或MVME712M输入/输出模块（有限
当IPMC761或IPMC712 PMC卡
填充在PMC插槽1中。在此配置中，PMC
插槽2包含一些保留用于
扩展SCSI。
n
n
n
头版
内部页面
3.
过渡模块
MVME761过渡模块提供了对IEEE 1284并联电源的工业标准连接器访问
端口，通过RJ-45的10BaseT或100BaseT端口
连接器，两个DB-9连接器，提供交流

0010-25341-501932

0010-25341-501932

The MVME5500 is the flagship of our VME product line that enables higher levels of performance in a single VMEbus slot MPC7457 PowerPC® processor at 1 GHz 512KB of on-chip L2 cache and 2MB of L3 cache AltiVec coprocessor for highperformance computational applications 512MB of on-board 133 MHz SDRAM ECC memory and 512MB additional memory via a memory mezzanine card for a total of 1GB of memory Two banks of soldered flash memory (32MB and 8MB) Dual independent 64-bit PCI buses and PMC sites with a bus speed of up to 66 MHz Gigabit Ethernet interface plus an additional 10/100BaseTX Ethernet interface 64-bit PCI expansion mezzanine connector allowing up to four more PMCs I/O compatibility with MVME51xx family Single VME slot even when fully configured with two PMC modules or one PMC module and an add-on memory mezzanine Support for processor PMCs (PrPMCs) n n n n n n n n n n n The Emerson Network Power MVME5500 series is designed to meet the needs of OEMs including those in defense and aerospace, industrial automation and medical imaging market segments. Customers looking for a technology refresh for their application while maintaining backward compatibility with their existing VMEbus infrastructure can upgrade to the MVME5500 series and take advantage of the enhanced performance features. The MVME5500 utilizes the MPC7457 processor running at 1 GHz, which is ideal for data intensive applications. The MVME5500 provides more than just better processor performance; it also provides balanced performance from the processor, memory, dual independent local buses and I/O subsystems. The powerful Marvell system controller, with support for a 133 MHz host bus and a 133 MHz SDRAM memory bus, is well matched to the high speed processor. To match the system I/O to the outstanding processor performance, the MVME5500 provides dual 64-bit, 33/66 MHz PCI buses. Each PCI bus has a PMC site supporting cards running at 33 or 66 MHz. The Universe II VME interface and PMCspan connector are isolated from the PMC sites on a dedicated 33 MHz PCI bus segment so that both PMC sites are capable of 66 MHz operation. The MVME5500 also offers a Gigabit Ethernet interface, a 10/100BaseTX Ethernet interface and two serial ports. All of this adds up to a set of well-balanced, high-performance subsystems for unparalleled performance. MVME5500 Series VMEbus Single-Board Computer Front page Interior page 2 MVME5500 Block Diagram Backwards Compatibility The MVME5500 continues the direction that Emerson started with the MVME5100 series of providing a migration path from Emerson’s embedded controllers and single-board computers (SBCs) to a single platform. This migration path enables OEMs to support varying I/O requirements with the same base platform, simplifying part number maintenance, technical expertise requirements and sparing. The MVME5500 series offers customers a migration path from the MVME2300, MVME2400, MVME2600, MVME2700 and MVME5100 boards to allow them to take advantage of features such as the MPC7455 processor, Gigabit Ethernet and dual independent 33/66 MHz PMC sites. IPMC Modules The IPMC761 and IPMC712 are optional add-on PMC modules that provide backward compatibility with previous generation Emerson products (such as MVME2600, MVME2700 and MVME5100 in IPMC mode) using the MVME761 or MVME712M transition module. IPMC modules provide rear I/O support for the following: COM2 Planar EIA232 UART COM1 FP I/O – A32/D64-bit A32/D64-bit, 133 MHz – A32/D64-bit 66 MHz PCI Local Bus 66 MHz PCI Local Bus – A32/D64-bit 33 MHz PCI Local Bus Port 2 10/100BaseTX FP I/O Port 1 10/100/1000 BaseTX FP I/O PMC FP I/O PMC FP I/O EIA232 P2 P1 Battery Universe II UART L3 Cache 2MB Ethernet 10/100BaseTX PHY SDRRAM Mezzanine 512MB Gigabit Ethernet Controller PMC Slot 2 NVRAM RTC PCI Bridge Flash 32MB (soldered) 8MB (soldered) MPC7457 1 GHz PMCspan Connector SDRRAM 133 MHz 512 MB PCI Bridge & Memory Controller Discovery IPMC Slot 1 One single-ended Ultra Wide SCSI port One parallel port Four serial ports (two or three async and one or two sync/async, depending on module) With an IPMC installed, one PMC slot is still available, providing support for OEM product customization. P2 I/O Modes The MVME5500 series supports two, jumper-configurable P2 I/O modes: PMC mode and IPMC mode. PMC mode is backward compatible with the MVME2300/ MVME2400 and MVME5100 in PMC mode. In PMC mode, 64 pins from PMC slot 1 and 46 pins from PMC slot 2 are available on P2 for PMC rear I/O. In IPMC mode, the MVME5500 series supports legacy MVME761 or MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or IPMC712 PMC card is populated in PMC slot 1. In this configuration, PMC slot 2 contains some signals that are reserved for extended SCSI. n n n Front page Interior page 3 Transition Modules The MVME761 transition module provides industrystandard connector access to the IEEE 1284 parallel port, a 10BaseT or 100BaseT port via an RJ-45 connector, two DB-9 connectors providing access to the asynchronous serial ports configured as EIA-574 DTE and two HD-26 connectors providing access to the sync/async serial ports. These serial ports, labeled as Serial 3 and Serial 4 on the faceplate of the MVME761, are individually user-configurable as EIA-232, DCE or DTE via the installation of Emerson Serial Interface Modules (SIMs). A P2 adapter board provides interface signals to the MVME761 transition module. Two separate P2 adapter boards are available: one for 3-row backplanes and one for 5-row backplanes. The 3-row P2 adapter board provides connection for 8-bit SCSI. A 5-row P2 adapter board supports 16-bit SCSI and PMC I/O. The MVME712M transition module provides industry-standard connector access to the Centronics parallel port, a narrow SCSI port, and four DB-25 connectors providing access to the asynchronous/ synchronous serial ports jumper configurable as EIA-232 DCE or DTE. A P2 adapter board provides interface signals to the MVME712M transition module. The 3-row P2 adapter board also provides connection for 8-bit SCSI. To gain access to the additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter board and extends its capability by providing access to the PMC I/O pins. Software Support Firmware Monitor Firmware must fulfill the traditional functions of power-on self-test (POST), initialization, low-level setup and debug, and operating system booting. Emerson’s innovative firmware (known as MOTLoad) that is resident on the MVME5500 exceeds these requirements with expanded features such as interrupt driven I/O, more comprehensive power-up tests and extensive diagnostics with new scripting capability. And of course, MOTLoad provides a debugger interface similar to the time proven “bug” interface on previous VMEbus boards from Emerson. Operating Systems and Kernels WindRiver Systems VxWorks, TimeSys Linux, Green Hills Software INTEGRITY and LynuxWorks LynxOS are available for the MVME5500. Libraries VSI/Pro VSIPL libraries from MPI Software Technology are available on the MVME5500. BETA 4.0 NDDS from Real Time Innovations (RTI) running over GbE and Native VME are available on the MVME5500 through RTI. Specifications Processor Microprocessor: MPC7457 Clock Frequency: 1 GHz On-chip L1 Cache (I/D): 32KB/32KB On-chip L2 Cache (I/D): 512KB L3 Cache: 2MB System Controller Marvell GT-64260B Main Memory Type: PC133 ECC SDRAM Speed: 133 MHz Configurations: 512MB in two banks Capacity: 512MB on-board, expandable to 1GB with add-on memory mezzanine card. Note: If a PMC module is plugged into PMC slot 1, the memory mezzanine card cannot be used because the PMC module covers the memory mezzanine connector. Flash Memory Type: EEPROM, on-board programmable Capacity: 40MB total in two banks of 32MB and 8MB, both soldered Write Protection: 32MB of surface-mount flash is write protectable via jumper NVRAM Capacity: 32KB (4KB available for users) Cell Storage Life: 50 years at 55° C Cell Capacity Life: 5 years at 100% duty cycle, 25° C Removable Battery: Yes Counters/Timers TOD Clock Device: M48T37V Real-Time Timers/Counters: Eight, 32-bit programmable Watchdog Timer: Time-out generates reset ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° Front page Interior page 4 VMEbus Interface: ANSI/VITA 1-1994 VME64 (IEEE STD 1014) Controller: Tundra Universe II DTB Master: A16-A32; D08-D64, SCT, BLT DTB Slave: A24-A32; D08-D64, BLT, UAT Arbiter: RR/PRI Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs System Controller: Yes, jumperable or auto detect Location Monitor: Two, LMA32 Ethernet Interfaces Port 1 Controller: Intel® 82544EI Gigabit Ethernet controller Interface Speed: 10/100/1000Mbps Connector: Routed to front panel RJ-45 Port 2 Controller: Controller integrated into GT-64260B system controller Interface Speed: 10/100Mbps Connector: Routed to front panel RJ-45 or optionally routed to P2, RJ-45 on MVME761 Asynchronous Serial Ports Controller: Two TL16C550C UARTs Number of Ports: Two, 16550 compatible Async Baud Rate, bps max.: 38.4K EIA-232, 115Kbps raw Connector: Routed to front panel RJ-45; one on planar for development use Dual IEEE P1386.1 PCI Mezzanine Card Slots Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors PCI Bus Clock: 33/66 MHz Signaling: 3.3V or 5V, configurable with keying pin Power: +3.3V, +5V, ±12V Module Types: Two single-wide or one doublewide, front panel or P2 I/O, PMC and PrPMC support Note: If a PMC module is plugged in PMC slot 1, the memory mezzanine card cannot be used because the PMC module covers the memory mezzanine connector. ° ° ° ° ° ° ° ° Å Å Å ° Å Å Å ° ° ° ° ° ° ° ° ° ° PCI Expansion Connector Address/Data: A32/D32/D64 PCI Bus Clock: 33 MHz Signaling: 5V Power: +3.3V, +5V, ±12V Connector: 114-pin connector located on MVME5500 planar, same location as on MVME5100 planar Power Requirements +5V ± 5% MVME5500-0163: 6.7 A typ., 8.0 A max. MVME5500-0163 with memory mezzanine: 7.5 A typ., 9.0 A max. MVME5500-0163 with IPMC712/761: 7.6 A typ., 9.2 A max. Note: In a 3-row chassis, PMC current should be limited to 19.8 watts (total of both PMC slots). In a 5-row chassis, PMC current should be limited to 46.2 watts (total of both PMC slots). Board Size Height: 233.4 mm (9.2 in.) Depth: 160.0 mm (6.3 in.) Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Max. Component Height: 14.8 mm (0.58 in.) IPMC Modules PMC Interface Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors PCI Bus Clock: 33 MHz Signaling: 5V Module Type: Basic single-wide; P2 I/O SCSI Bus Controller: Symbios 53C895A PCI Local Bus DMA: Yes, with PCI local bus burst Asynchronous (8-bit mode): 5.0MB/s Ultra SCSI: 20.0MB/s (8-bit mode), 40.0MB/s (16-bit mode) Note: 16-bit SCSI operation precludes the use of some PMC slot 2 signals. ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° ° Front page Interior page 5 Transition Modules I/O Connectors MVME761 MVME712M Asynchronous Serial Ports Two, DB-9 labeled as COM1 and COM2 Three, DB-25 labeled Serial 1, Serial 2 and Serial 3 Synchronous Serial Ports Two, HD-26 labeled as Serial 3 and Serial 4 (user-configurable via installation of SIMs); two 60-pin connectors on MVME761 planar for installation of two SIMs One, DB-25 labeled as Serial 4 Parallel Port: HD-36, Centronics compatible D-36, Centronics compatible Ethernet: 10BaseT or 100BaseT, RJ-45 Not available SCSI 8- or 16-bit, 50- or 68-pin connector via P2 adapter 8-bit, standard SCSI D-50 Board Size Height: 233.4 mm (9.2 in.) Depth: 80.0 mm (3.1 in.) Front Panel Height: 261.8 mm (10.3 in.) Front Panel Width – MVME761: 19.8 mm (0.8 in.) Front Panel Width – MVME712M: 39.6 mm (1.6 in.) ° ° ° ° ° Synchronous Serial Ports Controller: 85230/8536 Number of Ports: Two (IPMC761); one (IPMC712) Configuration: IPMC761: TTL to P2 (both ports), SIM configurable on MVME761; IPMC712: EIA-232 to P2 Baud Rate, bps max.: 2.5M sync, 38.4K async Oscillator Clock Rate (PCLK): 10 MHz/5 MHz Asynchronous Serial Ports Controller: 16C550 UART; 85230/8536 Number of Ports: Two (IPMC761); three (IPMC712) Configuration: EIA-574 DTE (IPMC761); EIA-232 (IPMC712) Async Baud Rate, bps max.: 38.4K EIA-232, 115Kbps raw Parallel Port Controller: PC97307 Configuration: 8-bit bi-directional, full IEEE 1284 support; Centronics compatible (minus EPP and ECP on MVME712M) Modes: Master only ° ° ° ° ° ° ° ° ° ° ° ° Power Requirements (Additional power load placed on MVME5500 with IPMC installed) IPMC761 IPMC712 +5V: 0.5 A max. 0.5 A max. +3.3V: 0.75 A max. 0.75 A max. Front page Interior page 6 All Modules Environmental Operating Non-operating Temperature: 0° C to +55° C (inlet air temp. with forced air cooling*) –40° C to +85° C Humidity (NC): 5% to 90% 5% to 90% Vibration: 1 G sinusoidal, 5–100 Hz 2 axes horizontal and vertical (NEBS1) *Note: Reference cooling requirements section of the user’s manual. DEMONSTRATED MTBF Predicted MTBF 207,058 hours, calculated using Bellcore Standard: Issue 6, Method 1, Case 3 Electromagnetic Compatibility (EMC) Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) Emerson board products are tested in a representative system to the following standards, results pending: CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. ° Å Å ° Å Front page Interior page PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. Emerson Network Power Sales Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720, Shanghai, China +86 215292 5693 Paris, France +33 1 69 35 77 00 , Tokyo, Japan +81 3 5424 3101, Munich, Germany +49 (0) 89 9 608 2 333 Hong Kong, China +852 2966 3210, Tel Aviv, Israel +972 3 568 4387 EmersonNetworkPower.com/embeddedcomputing Emerson Network Power. The global leader in enabling Business-Critical Continuity™. Precision Cooling Services Site Monitoring Surge & Signal Protection AC Power Systems Connectivity DC Power Systems Embedded Computing Embedded Power Integrated Cabinet Solutions Outside Plant Power Switching & Control Ordering Information Part Number Description MVME55006E-0161 1 GHz MPC7457 PowerPC processor, 512MB SDRAM, Scanbe handles 6E MVME55006E-0163 1 GHz MPC7457 PowerPC processor, 512MB SDRAM, IEEE handles 6E Memory RAM55006E-007 512MB memory mezzanine expansion card Related Products IPMC7126E-001 Multifunction rear I/O PMC module; 8-bit SCSI, Ultra Wide SCSI, one parallel port, three async and one sync/async serial ports 5E IPMC7616E-002 Universal IPMC761 for MVME5XXX & MVME6100 6E MVME712M6E Transition module with one DB-25 sync/async serial port, three DB-25 async serial port, one AUI connector, one D-36 parallel port, and one 50-pin 8-bit SCSI; includes 3-row DIN P2 adapter board and cable 5E MVME7616E-001 Multifunction rear I/O PMC module; 8-bit SCSI, one parallel port, two async and two sync/async serial ports. Transition module with two DB-9 async serial port connectors, two HD-26 sync/ async serial port connectors, one HD-36 parallel port connector, one RJ-45 10/100 Ethernet connector; includes 3-row DIN P2 adapter board and cable (for 8-bit SCSI) 5E MVME7616E-011 Transition module with two DB-9 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector, one RJ-45 10/100 Ethernet connector; includes 5-row DIN P2 adapter board and cable (for 16-bit SCSI); requires backplane with 5-row DIN connectors 5E PMCSPAN16E-002 Primary PMCSPAN-002 with original VME Scanbe ejector handles 5E PMCSPAN16E-010 Secondary PMCSPAN-010 with original VME Scanbe ejector handles 5E Documentation V5500A/IH MVME5500 Single-Board Computer Installation and Use V5500A/PG MVME5500 Single-Board Computer Programmer’s Reference Guide VME761A/IH MVME761 Transition Module Installation and Use VME712MA/IH MVME712M Transition Module Installation and Use MOTLODA/UM MOTLoad Firmware Package User’s Manual VIPMCA/IH IPMC712/761 I/O Module Installation and Use PMCSPANA/IH PMCspan PMC Adapter Carrier Board Installation and Use