Orbot-501566模块备件

易卖工控网（www.ymgk.com）提供”Orbot-501566模块备件”，产品详情：品牌/厂家：0040-32460-504815、型号：Orbot-501566、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

Orbot-501566

ENBT版本16.03.00或更高版本，无版本3.3
（1） 包括K保形涂层目录号和XT端环境目录号。
（2） 每个控制器多可以向一个消费控制器发送32个多播生成的标记。如果将这些相同的标签发送给多个消费者，则大数量为31。
表3:ControlLogix以太网/IP规范（1）
（1） 包括K保形涂层目录号。
猫固件数量
修订
RSLogix 5000®
软件版本
RSLinx®
软件
版本
包速率容量（包/秒）（2）
（2） 输入/输出数为大值；他们假设没有人机界面/消息。HMI/MSG数是大值，它们假设没有输入/输出。数据包速率因数据包大小而异。有关更多详细信息，请参阅
以太网/IP应用技术疑难解答、出版物ENET-AT003和特定目录号的EDS文件。
支持
扩展
环境（3）
（3） 模块在-20…70ºC（-4…158ºF）的宽温度范围内工作，符合ANSI/ISA-S71.04-1985 G1、G2和G3级，以及cULus、1级2类、C-Tick、CE、ATEX 2区和
SIL 2要求增加对盐、腐蚀物、水分/冷凝、湿度和真菌生长的防护。
集成运动
在以太网/IP上
输入/输出HMI/MSG网络轴
ENBT Any 8.02.00或更高版本2.30或更高版本5000 900否-
EN2F
2.x 15.02.00或更高版本
2.51或更高版本
10,000
2000
不
—
3.6或更高版本18.02.00或更高版本（4）
（4） 此版本需要使用CIP Sync™ 技术、以太网/IP网络上的集成运动或确匹配键控。
25000（5）至8轴
支持（5）
（5） 该值假设使用aL8x或L7x ControlLogix控制器。对于L6x ControlLogix控制器，请参阅《ControlLogix控制器用户手册》，出版物UM001。
EN2T
2.x或更早15.02.00或更高版本
2.51或更高版本
10,000
不
—
3.6或更高版本18.02.00或更高版本（4）25000（5）多8个轴
支持（5）
EN2Text
2.x 15.02.00或更高版本
2.51或更高版本
10,000
对
—
3.6或更高版本18.02.00或更高版本（4）25000（5）多8个轴
支持（5）
EN2TP任意24.00.00或更高版本（4）4.10或更高版本25000（5）不超过8个轴
支持（5）
EN2TPXT 10。x或更高版本24.00.00或更高版本4.10或更高版本25000（5）是，多8个轴
支持（5）
EN2TR
2.x 17.01.02或更高版本2.55或更高版本10000
不
—
5.x或更高版本18.02.00或更高版本（4）2.56或更高版本25000（5）多8个轴
支持（5）
EN2TRXT 5.028或更高版本20.01.00或更高版本2.56或更高版本25000（5）是，多8个轴
支持（5）
EN3TR 3.6或更高版本18.02.00或更高版本（4）2.56或更高版本25000（5）不超过128个轴
支持（5）
EN4TR任何24.00.00或更高版本（6）
（6） CIP安全需要FactoryTalk®Linx 6.11.00或更高版本。
4.10或更高版本
•50000无CIP
安全™
•25000个完整性
•15000个完整性
和保密性
•3700无CIP
安全
•2700具有完整性
•1700具有完整性和
保密性
多256个轴
支持（5）
EN4TRXT任何24.00.00或更高版本（6）4.10或更高版本
•50000无CIP
安全
•25000个完整性
•15000个完整性
和保密性
•3700无CIP
安全
•2700具有完整性
•1700具有完整性和
保密性
是，多256个轴
支持（5）
6罗克韦尔自动化出版物TD003Q-EN-E-2022年3月
表4-技术规范-1756以太网/IP模块（1）
（1） 包括K保形涂层目录号。
属性EN2F/B
EN2F/C
EN2T/D，
EN2TP/A
EN2TR/C，
EN3TR/B EN4TR/A ENBT/A
以太网/IP通信速率100 Mbps，无
自动协商10/100Mbps 10/100Mbps
1 Gbps 10/100 Mbps
电流消耗@5.1V DC 1.2 A 1 A 1.2 A 700 mA
24V DC 3 mA时的电流消耗
功耗6.2 W 5.1 W 6.12 W 3.7 W
热耗散21.28 BTU/hr 17.4 BTU/hr 20.9BTU/hr 12.6 BTU/hr
隔离电压
30V（连续），基本
绝缘类型，USB至
背板
在980V AC下进行型式试验
持续60秒
30V（连续），基本绝缘类型，
以太网到背板，USB到
背板和USB到以太网（2）
在980V AC下进行60 s的型式试验
（2） 仅适用于以下模块/系列：EN2T/D、EN2TR/C、EN3TR/B。
30V（连续），基本
绝缘类型，以太网至
背板，USB到背板，
和USB到以太网
在860V AC下进行型式试验
60秒
30V（连续），基本绝缘
类型，以太网到
背板
在707V DC下进行60 s的型式试验
槽宽1
模块位置基于机箱，任何插槽
底盘A4、A7、A10、A13、A17
电源，标准PA72、PA75、PB72、PB75、PC75、PH75
电源，冗余PA75R，PB75R，PSCA2
以太网端口1以太网光纤1以太网RJ45
类别5
2以太网RJ45
类别5
2以太网RJ45
5E类1以太网RJ45 5类
以太网电缆多模光纤，
LC连接器802.3兼容屏蔽或非屏蔽双绞线
USB端口（3）
（3） USB端口仅用于临时本地编程，不用于久连接。请勿在危险位置使用USB端口

Orbot-501566

Orbot-501566

ENBT Version 16.03.00 or later No Revision 3.3
(1) Includes the K conformal coating catalog numbers and the XT extreme environment catalog numbers.
(2) Each controller can send a maximum of 32 multicast produced tags to one single consuming controller. If these same tags are sent to multiple consumers, the maximum number is 31.
Table 3 - ControlLogix EtherNet/IP Specifications(1)
(1) Includes the K conformal coating catalog numbers.
Cat. No. Firmware
Revision
RSLogix 5000®
Software Version
RSLinx®
Software
Version
Packet Rate Capacity (packets/ second)(2)
(2) I/O numbers are maximums; they assume no HMI/MSG. HMI/MSG numbers are maximums, they assume no I/O. Packet rates vary depending on packet size. For more details, see
Troubleshoot EtherNet/IP Application Technique, publication ENET-AT003, and the EDS file for a specific catalog number.
Support for
Extended
Environment(3)
(3) Module operates in a broad temperature spectrum, -20…70 ºC (-4…158 ºF), and meets ANSI/ISA-S71.04-1985 Class G1, G2 and G3, as well as cULus, Class 1 Div 2, C-Tick, CE, ATEX Zone 2 and
SIL 2 requirements for increased protection against salts, corrosives, moisture/condensation, humidity, and fungal growth.
Integrated Motion
on the EtherNet/IP
I/O HMI/MSG Network Axes
ENBT Any 8.02.00 or later 2.30 or later 5000 900 No —
EN2F
2.x 15.02.00 or later
2.51 or later
10,000
2000
No
—
3.6 or later 18.02.00 or later(4)
(4) This version is required to use CIP Sync™ technology, Integrated Motion on the EtherNet/IP Network, or Exact Match keying.
25,000(5) Up to 8 axes
supported(5)
(5) This value assumes the use of aL8x or L7x ControlLogix controller. For a L6x ControlLogix controller, see ControlLogix Controllers User Manual, publication UM001.
EN2T
2.x or earlier 15.02.00 or later
2.51 or later
10,000
No
—
3.6 or later 18.02.00 or later(4) 25,000(5) Up to 8 axes
supported(5)
EN2TXT
2.x 15.02.00 or later
2.51 or later
10,000
Yes
—
3.6 or later 18.02.00 or later(4) 25,000(5) Up to 8 axes
supported(5)
EN2TP Any 24.00.00 or later(4) 4.10 or later 25,000(5) No Up to 8 axes
supported(5)
EN2TPXT 10.x or later 24.00.00 or later 4.10 or later 25,000(5) Yes Up to 8 axes
supported(5)
EN2TR
2.x 17.01.02 or later 2.55 or later 10,000
No
—
5.x or later 18.02.00 or later(4) 2.56 or later 25,000(5) Up to 8 axes
supported(5)
EN2TRXT 5.028 or later 20.01.00 or later 2.56 or later 25,000(5) Yes Up to 8 axes
supported(5)
EN3TR 3.6 or later 18.02.00 or later(4) 2.56 or later 25,000(5) No Up to 128 axes
supported(5)
EN4TR Any 24.00.00 or later(6)
(6) CIP Security requires FactoryTalk® Linx version 6.11.00 or later.
4.10 or later
• 50,000 without CIP
Security™
• 25,000 with integrity
• 15,000 with integrity
and confidentiality
• 3700 without CIP
Security
• 2700 with integrity
• 1700 with integrity and
confidentiality
No Up to 256 axes
supported(5)
EN4TRXT Any 24.00.00 or later(6) 4.10 or later
• 50,000 without CIP
Security
• 25,000 with integrity
• 15,000 with integrity
and confidentiality
• 3700 without CIP
Security
• 2700 with integrity
• 1700 with integrity and
confidentiality
Yes Up to 256 axes
supported(5)
6 Rockwell Automation Publication TD003Q-EN-E - March 2022
Table 4 - Technical Specifications - 1756 EtherNet/IP Modules(1)
(1) Includes the K conformal coating catalog numbers.
Attribute EN2F/B
EN2F/C
EN2T/D,
EN2TP/A
EN2TR/C,
EN3TR/B EN4TR/A ENBT/A
EtherNet/IP communication rate 100 Mbps, no
auto-negotiation 10/100 Mbps 10/100 Mbps
1 Gbps 10/100 Mbps
Current draw @ 5.1V DC 1.2 A 1 A 1.2 A 700 mA
Current draw @ 24V DC 3 mA
Power dissipation 6.2 W 5.1 W 6.12 W 3.7 W
Thermal dissipation 21.28 BTU/hr 17.4 BTU/hr 20.9BTU/Hr 12.6 BTU/hr
Isolation voltage
30V (continuous), basic
insulation type, USB to
backplane
Type tested at 980V AC
for 60 s
30V (continuous), basic insulation type,
Ethernet to backplane, USB to
Backplane, and USB to Ethernet(2)
Type tested at 980V AC for 60 s
(2) Applies only to these modules/series: EN2T/D, EN2TR/C,EN3TR/B.
30V (continuous), basic
insulation type, Ethernet to
backplane, USB to backplane,
and USB to Ethernet
Type tested at 860V AC for
60 s
30V (continuous), basic insulation
type, Ethernet network to
backplane
Type tested @ 707V DC for 60 s
Slot width 1
Module location Chassis-based, any slot
Chassis A4, A7, A10, A13, A17
Power supply, standard PA72, PA75, PB72, PB75, PC75, PH75
Power supply, redundant PA75R, PB75R, PSCA2
Ethernet port 1 Ethernet fiber 1 Ethernet RJ45
Category 5
2 Ethernet RJ45
Category 5
2 Ethernet RJ45
Category 5E 1 Ethernet RJ45 Category 5
Ethernet cable Multimode fiber,
LC connector 802.3 compliant shielded or unshielded twisted-pair
USB port(3)
(3) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
USB full speed (12 Mbps) —
Wiring category(4)
(4) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
3 - on USB ports 2 - on Ethernet ports
3 - on USB ports 2 - on Ethernet ports
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
Transmitter launch power at
Beginning of Life (BOL), min
Allow -1 dB at End of Life (EOL)
-19 dBm into 62.5/125 µm
fiber, — = 0.275
-22.5 dBm into 50/125 µm
fiber, — = 0.20
—
Rockwell Automation Publication TD003Q-EN-E - March 2022 7
Table 5 - Environmental Specifications - 1756 EtherNet/IP Modules(1)
Attribute EN2F/B
EN2F/C
EN2T/D,
EN2TP/A
EN2TR/C,
EN3TR/B EN4TR/A ENBT/A
Temperature, operating
IEC 60068-2-1
(Test Ad, Operating Cold)
IEC 60068-2-2
(Test Bd, Operating Dry Heat)
IEC 60068-2-14
(Test Nb, Operating Thermal
Shock)
0 °C < Ta < 60 °C (32 °F < Ta < 140 °F)
Series C Chassis:
0 ≤ Ta ≤ +60 °C
(+32 ≤ Ta ≤ +140 °F)
Series B Chassis:
0 ≤ Ta ≤ +50 °C
(+32 ≤ Ta ≤ +122 °F)
0 °C < Ta < 60 °C (32 °F < Ta <
140 °F)
Temperature, surrounding air,
max 60 °C (140 °F)
Series C Chassis: 60 °C (140
°F)
Series B Chassis: 50 °C (122 °F)
60 °C (140 °F)
Temperature, storage
IEC 60068-2-1 (Test Ab,
Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb,
Unpackaged Nonoperating Dry
Heat)
IEC 60068-2-14 (Test Na,
Unpackaged Nonoperating
Thermal Shock)
-40 °C< Ta < 85 °C (-40 °F < Ta < 185 °F)
Relative humidity
IEC 60068-2-30
(Test Db, Unpackaged Damp Heat)
5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc,
Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27
(Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27
(Test Ea, Unpackaged Shock)
30 g 30 g(2) 30 g(2) 30 g 50 g
Emission
CISPR 11 (IEC 61000-6-4) Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave
80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse
100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse
100% AM @ 1890 MHz
3V/m with 1 kHz sine wave
80% AM from 2000…2700 MHz
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…6000 MHz
10V/m with 1 kHz sine wave
80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse
100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse
100% AM @ 1890 MHz
1V/m with 1 kHz sine wave
80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4 — ±3 kV at 5 kHz on Ethernet ports(2) ±3 kV at 5 kHz on Ethernet
ports
±2 kV at 5 kHz on Ethernet
ports
Surge transient immunity
IEC 61000-4-5 — ±2 kV line-earth (CM) on Ethernet ports
Conducted RF immunity
IEC 61000-4-6 10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
(1) Includes the K conformal coating catalog numbers.
(2) Applies only to these modules/series: EN2T/D, EN2TR/C,EN3TR/B. 
8 Rockwell Automation Publication TD003Q-EN-E - March 2022
Table 6 - Certifications - 1756 EtherNet/IP Modules(1)
Certification
(2)
EN2T/D
EN2TP/A
EN2F/B
EN2F/C
EN2TR/C,
EN3TR/B ENBT/A EN4TR/A
c-UL-us
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File
E194810.
UL Listed for Class I, Division 2 Group
A,B,C,D Hazardous Locations, certified for
U.S. and Canada. See UL File E194810.
CSA
CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File
LR69960C.
—
CE
European Union 2004/108/IEC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with EN 61000-6-4; Industrial Emissions
ATEX
European Union 94/9/EC ATEX Directive, compliant with the following:
EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 Gc X
DEMKO13ATEX1325026X (EN2T/C only)
European Union
2014/34/EU ATEX Directive, compliant
with the following:
EN IEC 60079-0 General Requirements;
EN 60079-7 Explosive Atmospheres,
Protection “e”;
II 3 G Ex EC IIC T4 Gc
DEMKO18ATEX2139X
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
IECEx —
IECEx System, compliant
with:
IEC 60079-15; Potentially
Explosive Atmospheres,
Protection “n”
IEC 60079-0; General
Requirements
II 3 G Ex nA IIC T4 Gc
IECEx UL 14.0008X
—
IECEx System, compliant
with:
IEC 60079-0; General
Requirements
IEC 60079-15; Potentially
Explosive Atmospheres,
Protection “n”
IEC 60079-0; General
Requirements
II 3 G Ex nA IIC T4 Gc
IECEx UL 14.0008X
IECEx System, compliant with the
Standards IEC 60079-0, Edition 7 General
Requirements, and 60079-7, Edition 5.1,
Explosive Atmospheres, Protection “e”;
II 3 G Ex EC IIC T4 Gc
IECExUL 18.0130X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
EtherNet/IP ODVA conformance tested to EtherNet/IP specifications
(1) Includes the K conformal coating catalog numbers.
(2) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification detailsTable 7 - Technical Specifications - 1756 EtherNet/IP-XT Modules
Attribute EN2TXT/D, EN2TRXT/C, EN2TPXT/A EN4TRXT/A
EtherNet/IP communication rate 10/100 Mbps 10/100 Mbps
1 Gbps
Logix communication connections 256 1000 I/O
528 (1)
(1) There are 1000 CIP I/O connections and 528 CIP messaging connections.
TCP communication connections 128 512
Current draw @ 5.1V DC 1 A 1.2 A
Power dissipation 5.1 W 6.12 W
Thermal dissipation 17.4 BTU/hr 20.9BTU/Hr
Isolation voltage 30V (continuous), Basic Insulation Type, Ethernet to Backplane, USB to Backplane, and USB to Ethernet
Slot width 1
Module location Chassis-based, any slot
Chassis A4LXT, A5XT, A7XT, A7LXT A4LXT/C, A5XT/C, A7XT/C, A7LXT/C
Power supply, standard PAXT, PBXT
Power supply, redundant PAXTR, PBXTR
Ethernet port 2 Ethernet RJ45 Category 5
Ethernet cable 802.3 compliant shielded or unshielded twisted-pair
USB port(2)
(2) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
USB full speed (12 Mbps)
Wiring category (3)
(3) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on Ethernet ports
3 - on USB ports
North American temperature code T4A
ATEX temperature code T4
IECEx temperature code T4
Enclosure type rating None (open-style)
Table 8 - Environmental Specifications - 1756 EtherNet/IP-XT Module
Attribute EN2TXT/D, EN2TRXT/C, EN4TRXT/A
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold)
IEC 60068-2-2 (Test Bd, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25 ≤Ta ≤ +70 °C (-13 ≤ Ta ≤ +158 °F)
Temperature, surrounding air, max 70 °C (158 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged damp heat) 5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g
Emissions
CISPR 11 (IEC 61000-6-4) Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…6000 MHz
10 Rockwell Automation Publication TD003Q-EN-E - March 2022
EFT/B immunity
IEC 61000-4-4 ±3 kV at 5 kHz on Ethernet ports(1)
Surge transient immunity
IEC 61000-4-5 ±2 kV line-earth (CM) on Ethernet ports
Conducted RF immunity
IEC 61000-4-6 10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
(1) Applies only to these modules/series: EN2TXT/D, EN2TRXT/C EN4TXT.
Table 9 - Certifications - 1756 EtherNet/IP-XT Module
Certification(1)
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
EN2TXT/D, EN2TRXT/C EN4TRXT/A
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE
European Union 2004/108/IEC EMC Directive, compliant with the following:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with the following:
EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
European Union 2014/34/EU ATEX Directive, compliant with the
following:
EN 60079-7; Explosive Atmospheres, Protection “e”
EN 60079-0; General Requirements II 3 G Ex EC IIC T4 Gc
FM — FM Approved Equipment for use in Class I Division 2 Group A,B,C,D
Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EtherNet/IP ODVA conformance tested to EtherNet/IP specifications
Table 8 - Environmental Specifications - 1756 EtherNet/IP-XT Module (Continued)
Attribute EN2TXT/D, EN2TRXT/C, EN4TRXT/A
Rockwell Automation Publication TD003Q-EN-E - March 2022 11
EtherNet/IP Module Diagrams
Figure 1 - EN2T
Figure 2 - EN2TP
32518-M
32749-M
12 Rockwell Automation Publication TD003Q-EN-E - March 2022
Figure 3 - EN2TR, EN3TR
Figure 4 - EN2F
32519-M
32520-M
Rockwell Automation Publication TD003Q-EN-E - March 2022 13
Figure 5 - EN4TR
Accessories—Ethernet Network
Stratix Switches
To manage real-time control and information flow throughout the manufacturing and IT enterprise, Rockwell Automation offers a full
portfolio of industrial Ethernet switches and media, including a line of Stratix® switches integrated with Cisco® technology. The Stratix line
of switches includes modular managed, fixed managed, and unmanaged switches.
For detailed specifications for Stratix switches, see Stratix Ethernet Switch Specifications Technical Data, publication 1783-TD001.
Cat. No. Description Specifications
1585J-M8PBJM-x Ethernet RJ45 patchcord
x = 2 (2 m), 5 (5 m), or 10 (10 m) 8-conductor, teal riser PVC cable (flex-rated cable also available)
1585J-M8CC-H RJ45 insulation displacement connector (IDC) 0.128…0.325 mm2
 (26…22 AWG), Cat. 6, IDC, no tool required
1585J-M8CC-C RJ45 crimp connector with boot, qty = 50 pieces 0.128…0.205 mm2
 (26…24 AWG), Cat. 5e, requires crimp tool for assembly
1585A-JCRIMP Crimp tool —
9300-RADES Remote access dial-in kit 56 Kbps modem connection to devices on an Ethernet network
32794-M
14 Rockwell Automation Publication TD003Q-EN-E - March 2022
DeviceNet Network
The DeviceNet network is open, providing connections between simple industrial devices, such as sensors and actuators,
and higher-level devices, such as controllers and computers. The DeviceNet network uses the Common Industrial Protocol
(CIP) to control, configure, and collect data for industrial devices.
Table 10 - Technical Specifications - DNB DeviceNet Module
Attribute DNB/E
DeviceNet communication rate
125 Kbps (500 m max)
250 Kbps (250 m max)
500 Kbps (100 m max)
Number of nodes, max 64
Current draw @ 5.1V DC 400 mA
Current draw @ 24V DC 0 mA
DeviceNet current draw @ 24V DC 60 mA
DeviceNet voltage range 11...25V DC CL 2/SELV
Power dissipation 3.5 W
Thermal dissipation 11.9 BTU/hr
Isolation voltage
50V (continuous), basic insulation type, DeviceNet network to backplane
Type tested at 853V AC for 60 s
No isolation between USB and backplane
Slot width 1
Module location Chassis-based, any slot
Chassis A4, A7, A10, A13, A17
Power supply, standard PA72/C, PA75/B, PB72/C, PB75/B, PC75/B, PH75/B
Power supply, redundant PA75R, PB75R, PSCA2
DeviceNet power
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network must be powered from a source
compliant with the safety extra low voltage (SELV) or protected extra low voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from a source compliant with Class 2
or limited voltage/current.
DeviceNet port 1 DeviceNet open-style 5- or 10-pin linear plug
DeviceNet connector torque 0.56…0.79 N•m (5…7 lb•in)
USB port(1)
(1) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
USB full speed (12 Mbps)
Wiring category(2)
(2) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1. Refer to the DeviceNet Media Design and Planning Guide, publication DNET-UM072, for information specific to your DeviceNet network.
1 - On DeviceNet ports
3 - On USB ports
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Table 11 - Environmental Specifications - DNB DeviceNet Module
Attribute DNB/E
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold)
IEC 60068-2-2 (Test Bd, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
0…60 °C (32…140 °F)
Temperature, surrounding air, max 60 °C (140 °F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) 5…95% noncondensing 
Rockwell Automation Publication TD003Q-EN-E - March 2022 15
Vibration
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g
Emissions
CISPR 11 (IEC 61000-6-4): Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4 ±3 kV at 5 kHz on DeviceNet ports
Surge transient immunity
IEC 61000-4-5 ±2 kV line-earth (CM) on DeviceNet ports
Conducted RF immunity
IEC 61000-4-6 10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
Table 12 - Certifications - DNB DeviceNet Module
Certification(1)
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
DNB/E
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE
European Union 2004/108/IEC EMC Directive, compliant with the following:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with the following:
• EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
DeviceNet ODVA conformance tested to DeviceNet specifications
Table 11 - Environmental Specifications - DNB DeviceNet Module
Attribute DNB/E
16 Rockwell Automation Publication TD003Q-EN-E - March 2022
Accessories—DeviceNet Network
For more information, see the DeviceNet Media User Manual, publication DNET-UM072.
DH+ and Remote I/O Networks
The Data Highway Plus network supports messaging between devices. The remote IO-Link connects to remote I/O chassis
and other intelligent devices.
The DHRIO module supports messaging between devices on DH+™ networks. The remote I/O functionality enables the
module to act as a scanner for transferring digital and block transfer data to and from remote I/O devices.
The RIO module can act as a scanner or adapter on a remote I/O network. In addition to digital and block transfer
data, the RIO module transfers analog and specialty data without message instructions.
Example Configuration—DH+ Network
Cat. No. Description
KwikLink™ Lite flat media
KwikLink™ Lite flat media is a newer, ODVA-approved solution for wiring DeviceNet networks. Drop-lines for connecting nodes
are added by using the KwikLink Lite two-piece connectors. This cable system supports the intermixing of DeviceNet cable
types (thin-round with flat). All of the KwikLink Lite connectors provide insulation displacement technology with reduced
assembly time.
KwikLink flat media
The KwikLink flat media system provides a modular cabling method with its flat four-wire cable and Insulation Displacement
Connectors (IDCs). The KwikLink system allows nodes to be added to the network without severing the trunkline. Cutting or
stripping of the trunkline is eliminated, as is the need for predetermined cable lengths.
Round media
Round trunk cable is available in bulk spools or as pre-molded patchcords in varying lengths. A wide variety of rugged, durable
DeviceNet components is available for use in round trunk systems. Stainless steel versions of round cable system
components are also available:
• Thick-trunk round media systems use thick cable for maximum DeviceNet trunk line length.
• Round media thin-trunk systems use thin cable to reduce maximum trunk line distances with a more compact and costeffective installation for some applications. Thin-cable outer jacket material is TPE for additional chemical resistance.
DH+/RIO
CH A CH B
PanelView™ Plus
PLC-5® 1784-U2DHP
Studio 5000 environment
ControlLogix
DHRIO SLC™ 5/04
Rockwell Automation Publication TD003Q-EN-E - March 2022 17
Example Configuration—Remote I/O Network
Table 13 - Technical Specifications - 1756 DH+ and Remote I/O Modules
Attribute DHRIO/E RIO/B
Communication rate 57.6 Kbps, 115.2 Kbps, 230.4 Kbps
Remote I/O communication
Remote I/O scanner only
32 logical rack connections per remote I/O channel
16 block transfer connections per remote I/O channel
Remote I/O scanner or adapter(1)
32 physical racks (0…76), any combination of rack size
and block transfers
(1) When the RIO module is used as a remote I/O adapter, the chassis must include a ControlLogix controller.
Connections supported, max 32 10 scheduled I/O
Current draw @ 5.1V DC 850 mA 450 mA
Current draw @ 24V DC 1.7 mA 5 mA
Power dissipation 4.5 W 2.5 W
Thermal dissipation 15.4 BTU/hr 8.5 BTU/hr
Isolation voltage
30V (continuous), basic insulation type, DHRIO A/B to
backplane, and DHRIO A/programming port to DHRIO B
No isolation between DHRIO A and Programming port
Type tested at 877V DC for 60 s
50V (continuous), basic insulation type, RIO
communication lines to backplane
Type tested at 500V AC for 60 s
Slot width 1
Module location Chassis-based, any slot
Chassis A4, A7, A10, A13, A17
Power supply, standard PA72/C, PA75/B, PB72/C, PB75/B, PC75/B, PH75/B
Power supply, redundant PA75R, PB75R, PSCA2
Ports 2, individually selectable for DH+ or remote I/O 1 for remote I/O
Screw terminal torque — 0.5…0.6 N•m (5…7 lb•in)
Wire size 0.519 mm2
 (20 AWG) Belden 9463 copper twinaxial
Wiring category(2)
(2) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on DHRIO ports
3 - on local programming port 2 - on RIO ports
North American temperature code T4A
IEC temperature code T4 —
Enclosure type rating None (open-style)
RIO
RIO CLX
DH+/RIO
CH A CH B
PanelView Plus
PLC-5
RIO as a
Remote I/O Adapter
1791 I/O
1794 I/O
DHRIO as a Remote I/O Scanner
18 Rockwell Automation Publication TD003Q-EN-E - March 2022
Table 14 - Environmental Specifications - 1756 DH+ and Remote I/O Modules
Attribute DHRIO/E RIO/B
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold)
IEC 60068-2-2 (Test Bd, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
0…60 °C (32…140 °F)
Temperature, surrounding air, max 60 °C (140 °F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) 5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g
Emissions
CISPR 11 (IEC 61000-6-4) Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4 ± 2 kV at 5 kHz ±2 kV at 5 kHz
Surge transient immunity
IEC 61000-4-5 ± 2 kV line-earth (CM)
Conducted RF immunity
IEC 61000-4-6 10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
Table 15 - Certifications - 1756 DH+ and Remote I/O Modules
Certification(1)
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
DHRIO/E RIO/B
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA
CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D
Hazardous Locations. See CSA File LR69960C.
—
CE
European Union 2004/108/IEC EMC Directive, compliant with the following:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with the following:
• EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
—
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication TD003Q-EN-E - March 2022 19
Table 16 - Technical Specifications - 1756 DH+ and Remote I/O XT Module
Attribute DHRIOXT/E
Communication rate 57.6 Kbps, 115.2 Kbps, 230.4 Kbps
DH+ communication connections 32 DH+ messages per DH+ module
Remote I/O communication connections
Remote I/O scanner only
32 logical rack connections per remote I/O channel
16 block transfer connections per remote I/O channel
Connections supported, max 32
Current draw @ 5.1V DC 850 mA
Current draw @ 24V DC 1.7 mA
Power dissipation 4.5 W
Thermal dissipation 15.4 BTU/hr
Isolation voltage
30V (continuous), basic insulation type, DHRIO A/B to backplane, and DHRIO A/programming port
to DHRIO B
No Isolation between DHRIO A and Programming port
Type tested at 853V AC for 60 s
Slot width 1
Module location Chassis-based, any slot
Chassis A4LXT, A5XT, A7XT, A7LXT
Power supply, standard PBXT
Power supply, redundant None
Ports 2, individually selectable for DH+ or remote I/O
Screw terminal torque 0.5…0.6 N•m (5…7 lb•in)
Wire size 0.519 mm2
 (20 AWG) Belden 9463 copper twinaxial
Wiring category(1)
(1) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on DHRIO ports
3 - on local programming port
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Table 17 - Environmental Specifications - 1756 DH+ and Remote I/O XT Module
Attribute DHRIOXT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold)
IEC 60068-2-2 (Test Bd, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…+70 °C (-13…+158 °F)
Temperature, surrounding air, max 70 °C (158 °F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) 5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g
Emissions
CISPR 11 (IEC 61000-6-4) Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…2700 MHz
20 Rockwell Automation Publication TD003Q-EN-E - March 2022
Accessories—DH+ and Remote I/O Networks
EFT/B immunity
IEC 61000-4-4 ±2 kV at 5 kHz on DHRIO ports
Surge transient immunity
IEC 61000-4-5 ±2 kV line-earth (CM) on DHRIO ports
Conducted RF immunity
IEC 61000-4-6 10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
Table 18 - Certifications - 1756 DH+ and Remote I/O XT Module
Certification(1)
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
DHRIOXT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE
European Union 2004/108/IEC EMC Directive, compliant with the following:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with the following:
• EN 60079-15; Potentially Explosive Atmospheres, Protection “n”
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Cat. No. Description Specifications
1770-CD Cable to connect communication module to DH+ network Belden 9463 twinaxial
9300-RADKIT Remote access dial-in kit
56 Kbps modem connection to devices on a DH+ network, including the
following:
• Preconfigured modem
• Communication module
• DIN rail mounting hardware
• Associated cables