¥ 799.00
¥ 799.00
¥ 799.00
¥ 799.00
¥ 799.00
易卖工控网(www.ymgk.com)提供”3BSE019050R100全新现货”,产品详情:品牌/厂家:、型号:3BSE019050R100、成色:全新、货期:现货 1天内发货、保修:180天,更多产品详情就上易卖工控网。
重量A/AE/AER 9 10 kg
B/BE/BER 20 21 23
材料A/AE/B/BE不锈钢SIS 2383
DIN 17440 X12CrMoS17
Werkstoffnr 1.4104
AISI 430F
AER/BER耐酸钢:
DIN 17440 X2CrNiMo17 13 2
Werkstoffnr 1.4404
AISI 316L
精度等级A/AE/AER
B/BE/BER
± 0,5 %
线性偏差<±0,3
重复性误差<±0,05
滞后<0.2
补偿温度范围
+20-+80°C
零点漂移30(80 2))ppm/K
灵敏度漂移150
工作温度
范围
-10-+105°C
零点漂移50(100 1))ppm/K
灵敏度漂移250
储存温度
范围
-40-+105°C
1) #方向代号“V”的定义
和FV中的“A”
和FA在2.5.1坐标系中给出。
2) PFTL 101AER-0.5 kN/-1.0 kN
2.3定义
标称负载
标称负载Fnom是称重传感器所在测量方向上的大负载
尺寸在规定的精度等级内测量。称重传感器校准至Fnom。
体贴
灵敏度定义为标称负载和零负载之间的输出值差。
压力导管枕块称重传感器,水平测量PFTL 101,用户手册
2说明
3BSE009965R0401 en版本F 11
信号
额定输出值
在标称负载下
武力
体贴
Fnom公司
图5。体贴
精度和精度等级
精度等级定义为大偏差,并表示为标称负载下灵敏度的百分比。这包括线性偏差、滞后和重复性误差。
线性偏差
线性偏差是输出值之间绘制的直线的大偏差
在零负载和标称负载下。线性偏差与灵敏度有关。
信号
F力标称值
图6。线性偏差
滞后
滞后是指在从零开始的一个周期内,相同负载下输出信号的大差值
负载到标称负载和回到零负载,与标称负载下的灵敏度有关。滞后
导压器传感器的功率与负载周期成比例。
信号
F力标称值
图7。滞后
Weight A/AE/AER 9 9 10 kg B/BE/BER 20 21 21 23 Material A/AE/B/BE Stainless steel SIS 2383 DIN 17440 X12CrMoS17 Werkstoffnr 1.4104 AISI 430F AER/BER Acid resistant steel: DIN 17440 X2CrNiMo17 13 2 Werkstoffnr 1.4404 AISI 316L Accuracy Accuracy class A/AE/AER B/BE/BER ± 0,5 % Linearity deviation < ± 0,3 Repeatability error < ± 0,05 Hysteresis <0,2 Compensated temperature range +20 - +80 °C Zero point drift 30 (80 2)) ppm/K Sensitivity drift 150 Working temperature range -10 - +105 °C Zero point drift 50 (100 1)) ppm/K Sensitivity drift 250 Storage temperature range -40 - +105 °C 1) #efinitions of directions designations “V ”and “A” in FV and FA are given in 2.5.1 Coordinate System. 2) PFTL 101AER -0.5 kN/ -1.0 kN 2.3 #efinitions Nominal load Nominal load, Fnom, is the maximum load in the measurement direction for which the load cell is dimensioned to measure within the specified accuracy class. The load cell is calibrated up to Fnom. Sensitivity Sensitivity is defined as the difference in output values between nominal load and zero load. Pressductor PillowBlock Load Cells, Horizontal Measuring PFTL 101, User Manual 2 Description 3BSE009965R0401 en Rev F 11 Signal Rated output value at nominal load Force Sensitivity Fnom Figure 5. Sensitivity Accuracy and Accuracy Class Accuracy class is defined as the maximum deviation, and is expressed as a percentage of the sensitivity at nominal load. This includes linearity deviation, hysteresis and repeatability error. Linearity Deviation Linearity deviation is the maximum deviation from a straight line drawn between the output values at zero load and nominal load. Linearity deviation is related to the sensitivity. Signal F Force nom Figure 6. Linearity Deviation Hysteresis Hysteresis is the maximum difference in the output signal at the same load during a cycle from zero load to nominal load and back to zero load, related to the sensitivity at nominal load. The hysteresis of a Pressductor transducer is proportional to the load cycle. Signal F Force nom Figure 7. Hysteresis