Therma-Wave-502201模块备件

易卖工控网（www.ymgk.com）提供”Therma-Wave-502201模块备件”，产品详情：品牌/厂家：、型号：Therma-Wave-502201、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

Therma-Wave-502201
多支持24个FBM，提供
以太网现场总线和
FBMs。
具有一半尺寸的Y模块形状系数，并且
直接安装到现场机柜4或1x8中
FBM或1x12 FBM安装结构。他们也可以
通过Y形适配器间接安装在工业
外壳16和32，工业金属
机柜或现场机柜8。
集成到
的前部提供视觉状态指示
各自的功能。
对于冗余配置，用于
成对，一个用于“A”部分，一个用于“B”部分
冗余现场总线。的典型实现
如图1所示，安装详图
如图2所示。多支持24个FBM，提供
以太网现场总线和
FBMs。
具有一半尺寸的Y模块形状系数，并且
直接安装到现场机柜4或1x8中
FBM或1x12 FBM安装结构。他们也可以
通过Y形适配器间接安装在工业
外壳16和32，工业金属
机柜或现场机柜8。
集成到
的前部提供视觉状态指示
各自的功能。
对于冗余配置，用于
成对，一个用于“A”部分，一个用于“B”部分
冗余现场总线。的典型实现
如图1所示，安装详图
如图2.0至+12000 m（-1000至+40000 ft）所示
污染
ISA标准中定义的G3级（粗糙度），
S71.04
机械振动
5至500 Hz时为0.5 g
法规遵从性
符合欧洲EMC指令
89/336/EEC。
（a） 该模块的环境限制可能会因包含该模块的外壳类型而增强。{参考适用的
产品规格表（PSS），描述要使用的特定外壳类型。}
物理规格
安装
带Y形适配器
可安装在工业外壳16和32中，
IEMFA/IEMFR、FEM 8和现场外壳8
不带Y形适配器
只能在1x8、1x8 FBM或1x12 FBM中安装
安装结构
大量
0.3千克（0.7磅）
Therma-Wave-502201

Therma-Wave-502201
The supports up to 24 FBMs, providing
galvanic isolation between the Ethernet Fieldbus and
the FBMs.
s have a half-size Y-Module form factor, and
install directly into a Field Enclosure 4, or into a 1x8
FBM or 1x12 FBM mounting structure. They can also
be installed indirectly, via a Y-adapter, in Industrial
Enclosures 16 and 32, the Industrial Metal
Enclosures, or Field Enclosure 8.
Light-emitting diodes (LEDs) incorporated into the
front of the s provide visual status indications
of their respective functions.
For redundant configurations, s are used in
pairs, one for the “A” and one for the “B” portion of the
redundant Fieldbus. Typical implementation of the
is shown in Figure 1, and installation details
are shown in Figure 2.The supports up to 24 FBMs, providing
galvanic isolation between the Ethernet Fieldbus and
the FBMs.
s have a half-size Y-Module form factor, and
install directly into a Field Enclosure 4, or into a 1x8
FBM or 1x12 FBM mounting structure. They can also
be installed indirectly, via a Y-adapter, in Industrial
Enclosures 16 and 32, the Industrial Metal
Enclosures, or Field Enclosure 8.
Light-emitting diodes (LEDs) incorporated into the
front of the s provide visual status indications
of their respective functions.
For redundant configurations, s are used in
pairs, one for the “A” and one for the “B” portion of the
redundant Fieldbus. Typical implementation of the
is shown in Figure 1, and installation details
are shown in Figure 2.0 to +12,000 m (-1,000 to +40,000 ft)
Contamination
Class G3 (Harsh) as defined in ISA Standard,
S71.04
Mechanical Vibration
0.5 g at 5 to 500 Hz
Regulatory Compliance
In compliance with European EMC directive
89/336/EEC.
(a) The environmental limits of this module may be enhanced by the type of enclosure containing the module. {Refer to the applicable
Product Specification Sheet (PSS) which describes the specific type of enclosure that is to be used.}
PHYSICAL SPECIFICATIONS
Mounting
WITH Y-ADAPTER
Installable in Industrial Enclosures 16 and 32,
IEMFA/IEMFR, FEM 8, and Field Enclosure 8
WITHOUT Y-ADAPTER
Installable only in a 1x8, 1x8 FBM or 1x12 FBM
mounting structure
Mass
0.3 kg (0.7 lb)