易卖工控网(www.ymgk.com)提供”BENTILY3300/0368049-00模块备件”,产品详情:品牌/厂家:BENTILY、型号:3300/0368049-00、成色:全新、货期:现货 1天内发货、保修:180天,更多产品详情就上易卖工控网。
3300/0368049-00 •持续监测和保护是合适的 用于自动关机应用 •通用型单机操作 设备 •可选Modbus通信,通过 10BaseT/100BaseTX以太网,或 软件可配置485/232串行端口 •小包装。监视器模块:196.9毫米x 149.4毫米x 74.4毫米(7.75英寸x 5.88英寸x 2.93英寸)。 带有显示模块的监视器模块: 196.9毫米x 149.4毫米x 97.8毫米(7.75英寸x 5.88英寸x 3.85)” •DIN导轨或隔板安装选项 •18至36 Vdc电源输入。(可选110-220 Vac 外部电源) •24位ADC转换 •四个振动/位置/速度输入 •四个温度输入 •可配置比例因子和满标度范围 •每个通道多四个已处理变量 独立集成和过滤器控制 •内部状态正常检查 •独立警报和危险设定点 •200项进入事件列表 •六个继电器输出。继电器操作为 可编程 •每个传感器通道的缓冲输出 •四个可配置的4-20 mA记录器输出 •可选NEMA 4X/IP66玻璃纤维外壳,带 用于显示的窗口 •涂漆或不锈钢防风雨门 面板安装显示器 •危险区域批准 •海事批准 规格 输入 传感器输入 用户可以配置通道1 通过4接受来自的输入 加速度、速度或 位移传感器。 传感器通道类型 通道类型定义 用于处理的功能 将应用于输入信号 变量的类型或 测量值将为 从该输入派生。频道 类型还定义 必须使用的传感器。 传感器通道类型 包括: •加速或往复运动 加快 •速度或往复运动 速度 •径向振动(轴 振动) •推力(轴轴向 位移) •位置 •速度 加速度和 往复式 加快 通道类型 加速度通道类型 和往复加速度 通道类型支持二和 三线加速度传感器。 往复加速度 通道类型已计时正常 通道失效已禁用。 加速度变量 和往复运动 加速度变量 加速度变量和 往复加速度 过滤变量,并 已处理的测量值来自 3300/0368049-00 3300/0368049-00 • Continuous monitoring and protection is suitable for auto-shutdown applications • Stand-alone operation on general-purpose equipment • Optional Modbus communications via 10BaseT/100BaseTX Ethernet, or software-configurable 485/232 serial port • Small package. Monitor Module: 196.9 mm x 149.4 mm x 74.4 mm (7.75” x 5.88” x 2.93”). Monitor Module with attached Display Module: 196.9 mm x 149.4 mm x 97.8 mm (7.75” x 5.88” x 3.85)” • DIN rail or bulkhead mounting options • 18 to 36 Vdc power input. (optional 110-220 Vac external supply) • 24-bit ADC conversion • Four vibration/position/speed inputs • Four temperature inputs • Configurable scale factors and full scale ranges • Up to four processed variables per channel with independent integration and filter control • Internal OK checking with status • Independent Alert and Danger setpoints • 200-entry event list • Six relay outputs. Relay operation is programmable • Buffered outputs for each transducer channel • Four configurable 4-20 mA recorder outputs • Optional NEMA 4X/IP66 fiberglass housing with window for display • Painted or stainless steel weatherproof door for panel-mount display • Hazardous area approvals • Maritime Approvals Specifications Inputs Transducer Inputs Users can configure Channels 1 through 4 to accept input from acceleration, velocity or displacement transducers. Transducer Channel Types Channel Types define the functionality for processing that will be applied to an input signal and the kind of variables or measurement values that will be derived from this input. Channel Types also define the kind of sensor that must be used. Transducer Channel Types include: • Acceleration or Reciprocating Acceleration • Velocity or Reciprocating Velocity • Radial Vibration (shaft vibration) • Thrust (shaft axial displacement) • Position • Speed Acceleration and Reciprocating Acceleration Channel Types The Acceleration Channel Type and Reciprocating Acceleration Channel Type support two- and three-wire acceleration sensors. The Reciprocating Acceleration channel type has timed OK channel defeat disabled. Acceleration Variables and Reciprocating Acceleration Variables Acceleration Variables and Reciprocating Acceleration Variables are filtered and processed measurements from | | |
易卖工控网供应商瑞昌明盛进出口贸易有限公司为您提供BENTILY3300/0368049-00模块备件的详细产品价格、产品图片等产品介绍信息,您可以直接联系商家获取BENTILY3300/0368049-00模块备件的具体资料,联系时请说明是在易卖工控网看到的。