VDI67B34271102模块全新现货

易卖工控网（www.ymgk.com）提供”VDI67B34271102模块全新现货”，产品详情：品牌/厂家：、型号：VDI67B34271102、成色：全新、货期：现货 1天内发货、保修：180天，更多产品详情就上易卖工控网。

PTO（脉冲列输出，CN4）输出有5 V信号。取决于参数PTO\U模式，
这些信号是ESIM信号（编码器模拟）或通过PTI输入信号（P/D信号，
A/B信号、CW/CCW信号）。PTO输出信号可用作另一个PTO的PTI输入信号
装置信号电平对应于RS422，请参阅章节输出PTO（CN4）（请参阅第42页）。PTO
输出提供5 V信号，即使PTI输入信号为24 V信号。
电缆规格
使用预装配电缆以减少接线错误的风险，请参阅“附件和备件”一章
（见第635页）。
接线图
接线图脉冲输出（PTO）
PTO：通过PTI信号逻辑馈电
在PTO输出处，可以再次使用PTI输入信号来控制后续设备（菊花
链条）。根据输入信号的不同，输出信号可以是P/D信号、A/B信号或CW/CCW信号
信号PTO输出提供5 V信号。
连接PTO
 将接头连接至CN4。验证pin分配是否正确。
 确认接头正确锁定卡入。
屏蔽：需要，两端接地
双绞线：必需
骨盆：必需
电缆组成：8*0.14 mm2（8*AWG 24）
大电缆长度：100米（328英尺）
引脚信号对含义
1 ESIM\U A 2 ESIM通道A
2 ESIM\u A 2 ESIM通道A，反向
4 ESIM\u B 1 ESIM通道B
5 ESIM\U B 1 ESIM通道B，反向
3 ESIM\u I 3 ESIM指数脉冲
6 ESIM\u I 3 ESIM指数脉冲，反向
7.4参考电位
8.4参考电位

5 V signals are available at the PTO (Pulse Train Out, CN4) output. Depending on parameter PTO_mode, these signals are ESIM signals (encoder simulation) or logically fed through PTI input signals (P/D signals, A/B signals, CW/CCW signals). The PTO output signals can be used as PTI input signals for another device. The signal level corresponds to RS422, see chapter Output PTO (CN4) (see page 42). The PTO output supplies 5 V signals, even if the PTI input signal is a 24 V signal. Cable Specifications Use pre-assembled cables to reduce the risk of wiring errors, see chapter Accessories and Spare Parts (see page 635). Wiring Diagram Wiring diagram Pulse Train Out (PTO) PTO: Logically Fed Through PTI Signals At the PTO output, the PTI input signals can be made available again to control a subsequent device (daisy chain). Depending on the input signal, the output signal can be of type P/D signal, A/B signal or CW/CCW signal. The PTO output supplies 5 V signals. Connecting PTO  Connect the connector to CN4. Verify correct pin assignment.  Verify that the connector locks snap in properly. Shield: Required, both ends grounded Twisted Pair: Required PELV: Required Cable composition: 8 * 0.14 mm2 (8 * AWG 24) Maximum cable length: 100 m (328 ft) Pin Signal Pair Meaning 1 ESIM_A 2 ESIM channel A 2 ESIM_A 2 ESIM channel A, inverted 4 ESIM_B 1 ESIM channel B 5 ESIM_B 1 ESIM channel B, inverted 3 ESIM_I 3 ESIM index pulse 6 ESIM_I 3 ESIM index pulse, inverted 7 4 Reference potential 8 4 Reference potential