¥ 价格面议
¥ 价格面议
¥ 价格面议
¥ 价格面议
¥ 价格面议
易卖工控网(www.ymgk.com)提供”2711P-T15C21D8S AB 原装正品质保一年”,产品详情:品牌/厂家:、型号:2711P-T15C21D8S、成色:全新、货期:现货 1天内发货、保修:365天,更多产品详情就上易卖工控网。
收货检查
收到货后立即对机器进行检查,看机器外部是否存在损坏,如果发现损坏,请马上通知转运代理商。检查所有铭牌数据,特别是电压和绕组接线(星形或三角形)。机座号的电机外,所有电机的铭牌上都说明了轴承的型号。打开装运锁。用手转动电机轴,检查其是否能自由旋转。不要超过产品目录中规定的轴承允许负载值。装有滚动轴承的电机:在无径向力作用于电机轴的情况下运转电机可能会损坏滚动轴承。装有角接触轴承的电机:在无正确方向轴向力作用于电机轴的情况下运行电机可能会损坏角接触轴承。
装有油嘴的电机:启动电机或长期存放后启动电机时,请打入指定量的润滑油,以润滑油挤出油嘴为准。
Receiving inspection
Check the machine immediately after receiving the goods to see if there is any damage on the outside of the machine. If any damage is found, please inform the transfer agent immediately. Check all nameplate data, especially voltage and winding wiring (star or triangle). Except for the minimum bearing number on the motor base. Open the shipping lock. Rotate the motor shaft by hand and check whether it can rotate freely. Do not exceed the allowable bearing load specified in the product catalogue. Motor with rolling bearing: running the motor without radial force acting on the motor shaft may damage the rolling bearing. Motor with angular contact bearing: running the motor without axial force acting on the motor shaft in the correct direction may damage the angular contact bearing.
Motor with nozzle: when starting the motor for the first time or after long-term storage, please fill in the specified amount of lubricating oil, subject to the extrusion of lubricating oil from the nozzle. Refer to "manual lubrication" - section on page 8 for details.