¥ 价格面议
¥ 价格面议
¥ 价格面议
¥ 价格面议
¥ 价格面议
易卖工控网(www.ymgk.com)提供”P0961BS-OC FOXBORO 原装正品质保一年”,产品详情:品牌/厂家:FOXBORO、型号:P0961BS-OC、成色:全新、货期:现货 1天内发货、保修:365天,更多产品详情就上易卖工控网。
MAMC和NIOC板的外部24V电源
当为了保证在主电源断电时控制盘和NAMC以及NI0C板依然有效,要使用独立的供电电源。ACC600随附组装指导(ACC600外部+24Vd.c电源。58976270. DOC)和电缆组(3AFE61298771)。通电确认信号输入若ACC 600装有用于NAMC以及NIOC板的外部24V电源,则建议将交流电源接触器的一个NO(NormallyOpen)的辅助触点连接到数字输入上,作为“通电确认”信号,如: DI2。 输入用参数10.5选择。使用通电确认输入信号接通电源时,系统将自动复位。同时在断电时将斩波器故障及”PPCC LINK”故障屏蔽,以便能够接受通电确认信号通电确认输入的“0”会产生“关”的命令给ACC 600,即:惯性停车将造成机械抱闸。在通电确认输入为“0”时无法对ACC 600进行操作!注意:若使用ACC 600工程传动,参数10.5 POWER ON ACKN SEL应设定为=DI2 !
External 24V power supply for MAMC and NIOC boards
In order to ensure that the control panel, NAMC and ni0c board are still effective when the main power supply is powered off, independent power supply shall be used. The acc600 comes with assembly instructions (acc600 external + 24vd. C power supply. 58976270. DOC) and cable set (3afe61298771). Power on confirmation signal input if ACC 600 is equipped with external 24V power supply for NAMC and NIOC board, it is recommended to connect an NO (normally open) auxiliary contact of AC power contactor to digital input as "power on confirmation" signal, such as di2. Input is selected with parameter 10.5. When the power on confirmation input signal is used to power on, the system will reset automatically. At the same time, shield the chopper fault and "PPCC link" fault in case of power failure, so as to accept the power on confirmation signal. The "0" input of power on confirmation will generate a "off" command to ACC 600, that is, inertial parking will cause mechanical holding brake. ACC 600 cannot be operated when the power on confirmation input is "0"! Note: if ACC 600 engineering transmission is used, the parameter 10.5 power on ack sel should be set to = di2!