¥ 1495.00
¥ 1495.00
¥ 1495.00
¥ 1495.00
¥ 1495.00
易卖工控网(www.ymgk.com)提供”MPS022 13100-203 用户手册”,产品详情:品牌/厂家:、型号:MPC4 MPS022 13100-203、成色:全新、货期:现货 1天内发货、保修:180天,更多产品详情就上易卖工控网。
pan to convert it to through the base drainage.
6. Plug the original condensate drain opening with a field
supplied 3/4-in. NPT plug.
7. Slide the condensate drain pan back into the unit, align
the drain support with the grommeted opening in the
rear support panel and push until the support is seated
in the grommet.
8. Replace the front support panel by aligning the panel
with tabs in the raceway. Align the plugged
condensate drain pan coupling in the grommeted hole
as the panel is put in place.
9. Replace evaporator access panel and supply air access
panels.
A condensate trap must be installed at the unit due to the
drain connection being on the “negative pressure” side of
平移以将其转换为穿过底部排水管的形状。
6.用一个字段堵住原来的冷凝水排放口
提供3/4英寸。NPT插头。
7.将冷凝水排放盘滑回装置,对齐
排水管支架上带有密封圈开口
后支撑板并推动,直到支架就位
在套圈里。
8.对齐面板,更换前支撑面板
滚道上有标签。对齐插头
密封孔中的冷凝水排水盘联轴器
当面板就位时。
9.更换蒸发器检修面板和送风检修口
面板。
由于以下原因,必须在装置上安装冷凝水收集器:
排水管接头位于管道的“负压”侧