瑞昌明盛进出口贸易
首页> 瑞昌明盛进出口贸易> TPPB-02 3HNA023200-00101模块全新现货

X

TPPB-02 3HNA023200-00101模块全新现货
  • TPPB-02 3HNA023200-00101模块全新现货
  • TPPB-02 3HNA023200-00101模块全新现货
  • TPPB-02 3HNA023200-00101模块全新现货
  • TPPB-02 3HNA023200-00101模块全新现货
  • TPPB-02 3HNA023200-00101模块全新现货

TPPB-02 3HNA023200-00101模块全新现货

产品价格:
¥ 价格面议
立即咨询:
点击这里给我发消息 在线咨询
线:
15270269218
联系我时请告诉我是在易卖工控网看到的,谢谢!
牌:
号:
TPPB-02 3HNA023200-00101
色:
全新 | 保修180天
货:
现货 1天内发货
量:
(库存2222件)
诚信认证:
温馨提醒:点击联系方式和卖家进行沟通
在线咨询|QQ咨询|热线拨打!
商家信息
2
主营类目:
PLC
所 在  地:
江西 九江市 市辖区
企业类型:
生产厂商
企业规模:
1-50人
注册资金:
300万
咨询卖家:

易卖工控网(www.ymgk.com)提供”TPPB-02 3HNA023200-00101模块全新现货”,产品详情:品牌/厂家:、型号:TPPB-02 3HNA023200-00101、成色:全新、货期:现货 1天内发货、保修:180天,更多产品详情就上易卖工控网。

本示例以西门子S7-1200(CPU1212C)与三菱FX5U-32MR/ES为例交换数据,本数据交换采用S7TCP协议实现,其他支持S7TCP从站协议的PLC(例如S7300PN、SMARTS7-200和BCNet-S7300),均可实现该数据交换,步骤类似不再重复介绍。

S7-1200的网口连接XCNet-FX5U-S的LAN1或者LAN2口,FX5U自带以太网口与XCNet-FX5U-S的LAN1口连接,XCNet-FX5U-S通过BCDevice工具配置交换命令,实现高效实时的S7-1200和FX5U数据交换。

该功能基于XCNet-FX5U-S的S7TCP客户机功能实现,通过BCDevice(软件版本V1030及以上)进行主站命令配置,无须PLC编程,提高应用开发速度和便捷性。

本数据交换也可采用XCNet-FX5U-S的WiFi接口实现,如果S7-1200外扩WiFi接口,亦可通过无线方式进行数据采集和操作,具体在建立客户机时,本地接口可选择WiFi接口。

一、硬件连接

1、FX5U-32MR/ES可通过XCNet-FX5U-S与西门子SMART S7-200、S7-1200、S7-1500、S7300PN、CP343-1和BCNet-S7300等进行数据交换,且PLC无需编程。

1.webp.jpg

二、配置S7-1200

1、打开TIA portal V14,新建项目,组态,连接PLC

2.webp.jpg

2、选择CPU,右键点击PLC,选择属性

3.webp.jpg

3、配置属性

4.webp.jpg

        【1】    选择保护;

        【2】    访问权限设置为完全访问权限;

        【3】    打勾允许从远程伙伴(PLC、HIM、OPC)使用PUT/GET通信访问;

        【4】    点击确认下载。

三、配置XCNet模块数据交换命令

1、打开BCDevice,搜索到XCNet-FX5U-S后,选择【修改设备参数】

5.webp.jpg

2、配置XCNet-FX5U-S

6.webp.jpg

           【1】    填写三菱FX5U的IP地址,与PLC的连接方式选择TCP;

           【2】    模块LAN1的IP地址,必须与FX5U的IP地址在同一网段;

3、新建客户机

7.webp.jpg

           【1】    点击数据交换,右键创建新的客户机0;

           【2】    S7TCP协议,用于连接西门子网口PLC,此例中为S71200;远程服务器IP地址和端口号分别为S71200网口的IP地址和端口号;连接超时时间设定成5000mS;

           【3】    本地TSAP和远程TSAP为连接西门子网口的必填参数,总结经验如下:

9.png

         【4】    本地接口选择,当S71200的网口接模块在LAN1上,则选择LAN1;当S71200的网口连接在模块的LAN2口上,则选择LAN2;若是通过WiFi连接的,此处应当选择WiFi对应接口;

         【5】    点击确认,创建客户机。

4、在客户机中配置数据交换命令

10.webp.jpg

           【1】       点击新建命令(将S71200的DB1.DBW100读取到FX5U的D200)

           【2】       选择[远程→本地],即读取S71200数据到FX5U内,传输2个字;传输超时设置层2S;

           【3】       本地站点(FX5U)设置数据区域选择D(数据寄存器),起始地址为0,即从D200开始的两个字(D200);

            【4】       远程站点(S71200)设置数据区域选择DB,DB号为1,偏移地址为0(DB1.DBW100);

            【5】       点击“检查”按钮可进行规则检查,点击“确认”按钮即可生成命令。

5、客户机监视

11.webp.jpg

点击客户机监视按钮,【错误信息】为无错误,且【正确】有数据跳动,说明通信成功。

四、验证数据交换

1、    打开Portal14变量表,对DB1.DBW100进行数据修改,值为BC12H;

12.webp.jpg

2、   打开GXWork3变量监视表,查看当前D200的值为BC12H;

13.webp.jpg

3、上述监视说明已经将S71200的DB1.DBW100读取到FX5U的D200中,实现了数据交换功能;本数据交换功能亦可实现S71200到FX5U、FX5U到S71200的位、字节和字的数据交换功能。
TPPB-02 3HNA023200-00101模块全新现货 TPPB-02 3HNA023200-00101模块全新现货 TPPB-02 3HNA023200-00101模块全新现货

This example takes Siemens s7-1200 (cpu1212c) and Mitsubishi fx5u-32mr / es as an example to exchange data. This data exchange is realized by s7tcp protocol. Other PLCs supporting s7tcp slave protocol (such as s7300pn, smarts7-200 and bcnet-s7300) can realize this data exchange. The steps are similar and will not be repeated.
The network port of s7-1200 is connected to the lan1 or lan2 port of xcnet-fx5u-s. the Ethernet port of fx5u is connected to the lan1 port of xcnet-fx5u-s. xcnet-fx5u-s configures the exchange command through bcdevice tool to realize efficient and real-time data exchange between s7-1200 and fx5u.
This function is realized based on the s7tcp client function of xcnet-fx5u-s. the master station command is configured through bcdevice (software version v1030 and above) without PLC programming, which improves the speed and convenience of application development.
This data exchange can also be realized by using the WiFi interface of xcnet-fx5u-s. if the WiFi interface is expanded outside s7-1200, data acquisition and operation can also be carried out wirelessly. Specifically, when establishing the client, the WiFi interface can be selected for the local interface.
1、 Hardware connection
1. Fx5u-32mr / es can exchange data with Siemens smart S7-200, s7-1200, s7-1500, s7300pn, CP343-1 and bcnet-s7300 through xcnet-fx5u-s, and PLC does not need programming.
1.webp. jpg
2、 Configuration s7-1200
1. Open TIA portal V14, create a new project, configure and connect PLC
2.webp. jpg
2. Select CPU, right-click PLC and select properties
3.webp. jpg
3. Configuration properties
4.webp. jpg
【1】 Select protection;
【2】 Set the access permission to full access permission;
【3】 Tick to allow put / get communication access from remote partners (PLC, him, OPC);
【4】 Click to confirm the download.
3、 Configure xcnet module data exchange command
1. Open bcdevice, search xcnet-fx5u-s and select [modify device parameters]
5.webp. jpg
2. Configure xcnet-fx5u-s
6.webp. jpg
【1】 Fill in the IP address of Mitsubishi fx5u and select TCP as the connection mode with PLC;
【2】 The IP address of module lan1 must be in the same network segment as the IP address of fx5u;
3. New client
7.webp. jpg
【1】 Click data exchange and right-click to create a new client 0;
【2】 S7tcp protocol is used to connect Siemens network port PLC, s71200 in this example; The IP address and port number of the remote server are the IP address and port number of the s71200 network port respectively; The connection timeout is set to 5000ms;
【3】 Local TSAP and remote TSAP are mandatory parameters for connecting Siemens network interface. The experience is summarized as follows:
9.png
【4】 Local interface selection: when the network interface module of s71200 is on lan1, lan1 is selected; When the network port of s71200 is connected to the lan2 port of the module, select lan2; If it is connected through WiFi, the corresponding WiFi interface should be selected here;
【5】 Click OK to create the client.
4. Configuring data exchange commands in the client
10.webp. jpg
【1】 Click the new command (read db1.dbw100 of s71200 to D200 of fx5u)
【2】 Select [remote → local], that is, read s71200 data into fx5u and transmit 2 words; Transmission timeout setting layer 2S;
【3】 The local station (fx5u) sets the data area selection D (data register), and the starting address is 0, that is, two words (D200) starting from D200;
【4】 The remote station (s71200) sets the data area selection dB, the DB number is 1, and the offset address is 0 (db1. Dbw100);
【5】 Click the "check" button to check the rules, and click the "confirm" button to generate commands.
5. Client monitoring
11.webp. jpg
Click the client monitoring button, the [error message] is no error, and the [correct] data jumps, indicating that the communication is successful.
4、 Verify data exchange
1. Open the portal14 variable table and check db1 Dbw100 modifies the data and the value is bc12h;
12.webp. jpg
2. Open the gxwork3 variable monitoring table and check that the current value of D200 is bc12h;
13.webp. jpg
3. The above monitoring instructions have set the db1 of s71200 Dbw100 reads into D200 of fx5u and realizes data exchange function; This data exchange function can also realize the data exchange function of bits, bytes and words from s71200 to fx5u and fx5u to s71200.


易卖工控网供应商瑞昌明盛进出口贸易为您提供TPPB-02 3HNA023200-00101模块全新现货的详细产品价格、产品图片等产品介绍信息,您可以直接联系商家获取TPPB-02 3HNA023200-00101模块全新现货的具体资料,联系时请说明是在易卖工控网看到的。

安全提示:
请勿随意接收任何来源不明的文件,请勿随意点击任何来源不明的链接。涉及资金往来的事项请务必仔细核对资金往来信息。
内容声明:
易卖工控为第三方交易平台及互联网信息服务提供者,易卖工控所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。易卖提醒用户购买商品/服务前注意谨慎核实。如用户对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前与店铺经营者沟通确认;易卖工控存在海量店铺,如用户发现店铺内有任何违法/侵权信息,请立即向易卖工控举报并提供有效线索。

0

购物车

客服

收藏

公众号

公众号

反馈

︿

顶部

在线联系商家 关闭

瑞昌明盛进出口贸易

主营类目:PLC热线:15270269218

地址:江西 九江市 市辖区

点击这里给我发消息在线咨询 点击这里给我发消息QQ咨询